Chroma Kit Manifold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guide and cover to the Phrozen Arco with Chroma Kit on the top
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 284
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to close the big gab behind the Chroma Kit on my Phrozen Arco.
This design leads the tubes inside the printer from behind the Choma kit, from being in a line to exit in a square.
Two new revisions has been added.
V2: Tbe manifold has been made hollow giving the four tubes more freedom for movement while printing.
V3: Identical to V2, but with an option for adding an additional tube if the Chroma kit is not in use.
Reuse the O-ring and the tube connector.
Print instructions:
Material: PLA is fine.
Support: not required. (Support might be required for V2 and V3)
Layer height: 0.2 mm or variable
Infill: 10-20%
Additional parts: Reuse the screws fixing the original window.