Chroma Kit Manifold
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Guide and cover to the Phrozen Arco with Chroma Kit on the top
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 124
- Makes
- 0
- Views
- 284
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I wanted to close the big gab behind the Chroma Kit on my Phrozen Arco.
This design leads the tubes inside the printer from behind the Choma kit, from being in a line to exit in a square.
Two new revisions has been added.
V2: Tbe manifold has been made hollow giving the four tubes more freedom for movement while printing.
V3: Identical to V2, but with an option for adding an additional tube if the Chroma kit is not in use.
Reuse the O-ring and the tube connector.
Print instructions:
Material: PLA is fine.
Support: not required. (Support might be required for V2 and V3)
Layer height: 0.2 mm or variable
Infill: 10-20%
Additional parts: Reuse the screws fixing the original window.