Counting matching models…
After each resin print, the printed model and buildplate remain covered in uncured resin, which tends to remain on the model and buildplate unless they are tilted. For this, EasyDrip comes to help you, being the indispensable accessory…
Simple remix of Zwoop's Mighty 8k cover, shrunk down to fit the Mini 8k and to fit on the Prusa MK3 bed in one piece. Current configuration requires a vat screw to be loosened/lifted when putting the cover on or taking it off.
To install this you will have to take part of the build platform apart. Printable in resin or as a filament print.
Phrozen XP Finder Numbered for Saturn 4 Ultra. This is for the 8-way exposure calibration with numbers added. Labeled as original due to Printables UI limitations.
A simple vet cover for Phrozen Mighty 8K Included STEP file for anyone who wishes to edit or modify -NatNell
VatCap for Phrozen SM8K/SM8KS is perfect to protect your resin from dust, light, impurities and other undesired stuff! Some time may pass between prints and it is not uncommon for dust or unwanted light to get into the resin left in the…
Simply slides onto the printer as would your print bed, enables you to twist down the knob and lock it into place. Then you can slide on your print bed at an angle and enable it to drip.
This is a mod for the Phrozen Sonic Mighty 8K/12K. It is a lid spacer/riser and frame for a PTC heater and W2310 temperature controller. The spacer is used so that there is no drilling/cutting of the cover and base for cabling and…
Try DripTrap, the simple and definitive solution by Assezeta against stains on your Phrozen Sonic Mini 8K or 8KS! When handling the build plate, it is not uncommon to have some drops of resin on vat edges, main body or touchscreen, so…
easy clip on drip hanger for the build plate and also works as a stand/foot for the Phrozen3d Sonic Mighty 8K
A poop collection tray designed for the Phrozen Arco printer. Can be placed behind the printer and snaps with magnets to the plate below the poop exit. A foot that goes under the printer has been added and makes it easy to place the tray…
This drip stand takes inspiration from a few others out there in particular https://www.thingiverse.com/thing:4671138 and https://www.thingiverse.com/thing:3784926 It is designed for the 32.5mm height vat of the Phrozen Sonic Mighty 8K.…
Using the G-Codes from PIXUP-Slicer, we created this Orca-Slicer profile. We used it for more than 300 printhours now without any problems.
I needed a build plate hanger for the mighty 4k, but all of the designs I found required fiddling with the bracket before use. This design replaces one of the handles so that you can simply loosen the knob, reorient the position and…
This is a spacer for the Wham Bam Flex Build Plate for the Phrozen Sonic Mini 8KS. No glue or any adhesive needed. Just slide the spacer to the bottom of the metal z-limit arm and it will stay in place due to the tight tolerances. I…
I really love my Phrozen Sonic Mighty 4k, but the hood that covers the printer/vat area was a big nuisance. Every time a print was ready you needed to remove it and put it somewhere where it didn't stand in the way. Another thing that…
I made a nice enclosure for my resin printer. It has a built in air purifier, curing chamber, storage and wheels for me to roll it around. This last feature was great when I had it in a room with a nice level floor. Then I moved into a…
A Spacer or riser that fits between the lid and the body of my phrozen sonic mini 4k. The purpose is to feed wires inside the print area (for my printer heater ) without making holes in the lid. A few minor notes: The phrozen sonic mini…
Some printers have feets on their vats, so you can set them to any table surface, Phrozen sonic mini 4K doesn't have that and I always have trouble finding a good spot to lay it down between dripping leftover resin back to resin bottle…
It doesn't have every detail, but it should have the important parts for anyone looking to make mods
This is vat stand for the Phrozen Sonic Mini. It's made around the dimensions of the aluminum vat but may fit the plastic one as well. The idea behind this was something a bit more safer for the fep film where you don't have to worry…
The lid is easily printable and easy to assemble. You'll need only 3x exagonal M3 nuts and 3x M3x16 (or longer) screws.
Thanks to https://www.thingiverse.com/gorefish , but I just decided to slightly adjust this design to meet my needs, it is slightly angled. Print Settings Printer: Zortrax M200 Rafts: Doesn't Matter Supports: No Resolution: 0.19 Infill:…
This print allows for a quicker release of the vat without having to fully unscrew the bolts which takes forever. Loosening them slightly allows the vat to simply slide out of its position. For this to work you need to remove the lower…
I love my new Phrozen Sonic Mini but the fact that the plate top is flat just makes it so messy to take big prints out. So I decided to make this tray to cover the printer and the vat to avoid splits. 2 versions included one with a gap in…
Couvercle permettant de fermer le bac à résine d'une Phrozen Mighty Revo 14k. Pas besoin de supports, j'ai réalisé un cadrillage sur le dessous pour éviter es décollement de la couche en contact avec le plateau.
I recently received my KickStarter “Phrozen ARCO” fdm printer. After going through all the calibrations and firmware updates, I started noticing Z-banding on all of my test prints. Upon inspecting possible causes, I found the top of all 4…
Wanted to mount my Phrozen Cure Beam unit to the square hole pegboard on my bench so whipped this up. Made the peg holes then decided it was easier to ziptie it anyway, but i also included a couple of countersunk holes for anyone wanting…
I tried to reduce plastic consumption, make it light, and keep it easy to print for most users. I recommend printing in ASA and using tree support (I make them manually on Orca to get the best result, but it should be okay in auto I…
This is a adapter plate for a Creality "cure and wash" UW-01 to hold the print bed from your sonic mini and sonic mini 4k printers. It will reach a bit deeper into the var than the default so that about 2 liters of alcohol should be…
I purchased a flexi-plate for my Phrozen Mighty 8K and noticed that the standard leveling brackets did not have enough vertical clearance resulting in one or both sides crashing into the screen. I made this part to replace the standard…
I made a replacement extruder cover with an open top hole for the heat break cooling fan. The intent was to minimise the whistling jet engine sound from the air current produced by the small 25mm fan. This didn't really work as intended,…
Phrozen includes a top cover for the vat, which is great, but 2 undesirable things can still happen: The FEP on the bottom of the vat can get scratched if you are not using a vat Light can get in through the bottom, curing resin that you…
This is technically not necessary for mounting the FEP or NFEP to the vat. However, it does simplify things and assures that you get no wrinkles or lose corners. As you can see from the pictures, the idea is to put the FEP on the frame,…
I made this adapter for the top basket, it is not needed for the bottom basket as the build plate fits snugly. What I found out is that the mighty's build plate has enough wiggle room for it to move and with the right angle and distance…
Here is an accessory to attach to the arm of your printer every time you want to completely empty a bottle into the vat! ESSENTIAL when you don't want to waste time waiting for the bottle to finish dripping into the vat. You will recover…
Update 27-6-2026: I have added new outer mold casings with more space to be able to create a thicker, 2mm walled silicone sock. I thought my own test cast was a bit thin walled, so I added the 2 extra files. Someone jokingly asked me if I…
Simple cover for a Phrozen Transform vat with a folding centre line so it can slide in between the handles. Made fairly thin to reduce print time however if you would like it thicker, you should be able to resize it on the Z axis by 5mm…
These blocks, you need 1 on each side, are needed to align the gantry of the Arco, when the left en right Z-axis are no longer at the same height. Some people seem to have accidentally thrown away their Z-axis alignment blocks. These are…
This is technically not necessary for mounting the FEP or NFEP to the vat. However, it does simplify things and assures that you get no wrinkles or lose corners. As you can see from the pictures, the idea is to put the FEP on the frame,…
First things first, yes, this piece should be completly unnessecary. The engineers of Phrozen should have considered the size of the SM4K printbed when they designed the washing station. However, for some reason, they didn't. So if you…
I purchased a second hand Phrozen Transform that came with 3 vats and I needed a safe way to store them without damaging the FEP. Also wanted a stand to sit a vat on while cleaning. Vat fits snug enough on the post that I can lift it…
Phrozen Shuffle XL exhaust vent. The vent is designed to receive a 4 inch dryer hose. The internal fan on this printer is plenty strong enough to efficiently push air though the hose. I printed this part with supports from the build plate…
The adjustment slots in the stock Phrozen Mighty 8K (and others?) build plates isn't long enough to allow for the build plate zero wizard to work properly since the hall sensor won't pick up the metal tab. This is a fix with a very broad…
Print in ASA for UV stability. Layer height 0.15 to get it flush.
I printed with the same settings as the parent model: PLA (PLA+ in my case) 0.12mm layer height 3 walls 3 top/bottom layers 15% infill
Converted my Transform to a 13.6" 7K Mono LCD, Vlare control board and 5" touch screen provided by Duobond . These files allow you to mount the new (optional) 5" screen through the existing opening and require no cutting or drilling. I…
To connect the back venting fan of phrozen ARCO FDM printer, I made an adaptor to connect with 10cm ventilation pipe. 4 magnet holes are preserved for 8mm(diameter) x 4.5mm(thickness) round magnet. PETG is preferred for sufficient…
The holder on the Anycubic wash&cure doesn't quite fit the buildplate of the Sonic mini so I made this adaptor to replace the metal one. Added a V2. I found the buildplate knob would sometimes hit the wash&cure knob making it hard to…
This mount lets you drop the Mars 5 Ultra build plate straight into a Phrozen wash container so you can clean the print right off the plate. Max distance from the plate to the bottom of the container is ~130 mm To submerge the plate just…
Once in a while, I either have very large items, or more likely, my large rectangular IPA containers to cure. On my Phrozen Luna curing station, I needed something to allow for this, since the rotating table can only hold so big items…
While waiting for the Colour Chrome, would it be nice to have the filament on the top og the Arco printer when the Penta Shield is mounted. This design is a backed for the included spool holder. it shall replaced the top lid window and…
The lid is easily printable and easy to assemble. You'll need only 3x exagonal M3 nuts and 3x M3x16 (or longer) screws.
Lid spacer that works on the Phrozen Mini 8k/s, allowing for a cable to be run into the chamber. Remix for smaller FDM.
simple adapter to install and clean any models made on my Phrozen mini 8K and mini 8KS resin printers into my Elegoo XS Wash bin. There are two versions of this adapter. one high for tall models and one low for… smaller models. Designed…
Phrozen recently made some dimensional changes to the resin vat for their Mini 8KS printer. This new vat is a bit wider so the older vat covers won't fit.
Print two of the arms and one bucket. Arms should be oriented to sit on their side. One side has a slope in the channel so you don't need supports make sure you have it on the correct side. Print one bucket sitting flat also no supports,…
I have made this design for adding an additional webcam to my Phrozen Arco FDM 3D printer. It might only be useable without the Color Chrome kit mounted. (have not been able to test it together with the kit.
Hi.. I like to filter any reused or leftover resin. This provides a stable filter holder that I can pour the resin into, which then delivers it to the centre of the build plate to fill the tank. This way, the resin doesn’t drip over the…
This is a duct hose adapter for the Phrozen Mega 8KS. The nozzle diameter is designed at 72mm to fit a 75mm duct connection. The 75mm duct fits in tightly. Please secure it with zip ties or similar to prevent it from coming loose. A STEP…
I made a snap-on cover for the rear holes in the Pentashield. This rear cover was designed for use in combination with this Pentashield top filament feed-through Print settings: 0.4 nozzle first layer 0.2, the rest 0.12 layer height 3 walls
I made a fan to 80mm hose adapter that will fit the original exhaust fan on the Phrozen Arco Pentashield. You can use the 4 nuts which secure the fan grate. Fan grate needs to be removed for the adapter to fit onto the fan. No need for…
While waiting for the Colour Chrome, would it be nice to have the filament on the top og the Arco printer when the Penta Shield is mounted. This design is a backed for the included spool holder. it shall replaced the top lid window and…
Phrozen Mini 8k Vat Cover Enhanced This is a structurally stronger and dimensionally more precise cover from the original design. It can also isolate any light from the outside a bit better. For Phrozen Sonic Mini 8k& 8ks STEP file incl.…
If you need a replacement for the filament spool holder is here one you can print. Print settings: 3-4 wall loops and top/bottom layers. Infill 20-30% Support: None. Material: PETG or ASA due the the load at the arm. Photos: Original Arco…
Print two, double tape them on each side of UV acrylic case, done! Category: 3D Printer Accessories
V2 I think I fixed it all! This is a replacement/additional VAT for the Phrozen Sonic 4k with its 6.1inch LCD. It should also fit Phrozen Sonic Mini 4K. Together with Top- and Bottom-Cover. Rather then using Nuts I'm relying on long…
A screw-on funnel for a 500 ml Phrozen resin bottle. It is based on the same concept as a couple of other screw-on funnels ( Funnel for resin bottles by Anycubic, Elegoo, Geeetech, … , and Funnel for ERYONE resin bottle (500 g) by TBA)…
I made hole covers for my MK8 incase my fep breaks. With these cover the 3D resin wont leak in to the inside of the printer nor the Zrod will be damaged. I have put glass silicone under the ring to make a resin tight seal. The seal ring…
I modified Zwoop's awesome tray and lid to fit the aluminum version of the Mighty 4k vat
This is a Filter enclosure for a Phrozen Mini 4k. You still have to place the printer in a ventialted area. But with the filter the smells are less. I also turned the Fan around. It was blowing Air into the machine. With the first…
Simple, build it on its side so you don't need support anywhere. Resolution / infill don't matter No need for rafts / supports etc
Minimalistic model to hold the ubiquitous 100W PTC heater with fans used to keep resin printer enclosures heated. Designed to hold heater using 2 M4x60mm hex standoffs. Needs two M4 flat head screws on bottom and two pan head screws on…
Remix from: https://www.thingiverse.com/thing:4723489 I changed the view a little, added outer fillets and made the dimensions a little smaller. Sources: https://www.tinkercad.com/things/9yi8jNFHQ02 Category: 3D Printer Accessories
Fits onto the same area your build plate would slot onto, place your filter into the circular hole and allow it to securely filter your resin and drain without making a mess.
Tired of using electrical tape to bridge the screen gaps on your resin printer? Looking for a neater solution? Well, here it is! This is a vinyl screen gasket for the Phrozen Sonic Mighty 8k resin 3D printer. The cut file allows room for…
To assemble, you need a 18mm dowel that is at least 350mm long. To be used with a funnel .
A very simple holder to mount the Sonic Saber to a Multiboard. Attaches with two flat big thread t-bolts.
Introducing the Lid spacer designed specifically for Phrozen mini 8K! 🎉 Building upon the great work by Feday, I've fine-tuned this design to perfectly accommodate the larger dimensions of the Phrozen mini 8K. Now, you can effortlessly…
Vat cover for the Mega 8K S. Size is pretty big, most likely needs to be split for most printers.
