Phrozen Sonic Mini Vat Feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some printers have feets on their vats, so you can set them to any table surface, Phrozen sonic mini 4K doesn't have…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 81
- Makes
- 1
- Views
- 731
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Some printers have feets on their vats, so you can set them to any table surface, Phrozen sonic mini 4K doesn't have that and I always have trouble finding a good spot to lay it down between dripping leftover resin back to resin bottle and cleaning the vat.
Feet are ment to be pressure fitted, but you can use a drop of glue if they are not tight. I had to use hobby knife a little bit to trip the edges of the feet to get them to fit.
This is a remix from @guelz's design
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament:
random pla white
Notes:
Feet takes 20 minutes to print with 60mm/s speed and uses 2 grams (0.69 meters) of filament.
Vat holder takes little under 3 hours to print and uses 24 grams (8 meters) of filament. You don't need supports, bridging is just a short one. I accidentally made mine with 3 walls, you might want to increase to 4 or 5 walls to get even more rigid print and it won't increase the use of filament or time that much.
Category: 3D Printer Accessories