Phrozen Sonic Mini Vat Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some printers have feets on their vats, so you can set them to any table surface, Phrozen sonic mini 4K doesn't have…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 731
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Some printers have feets on their vats, so you can set them to any table surface, Phrozen sonic mini 4K doesn't have that and I always have trouble finding a good spot to lay it down between dripping leftover resin back to resin bottle and cleaning the vat.
Feet are ment to be pressure fitted, but you can use a drop of glue if they are not tight. I had to use hobby knife a little bit to trip the edges of the feet to get them to fit.
This is a remix from @guelz's design
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament:
random pla white
Notes:
Feet takes 20 minutes to print with 60mm/s speed and uses 2 grams (0.69 meters) of filament.
Vat holder takes little under 3 hours to print and uses 24 grams (8 meters) of filament. You don't need supports, bridging is just a short one. I accidentally made mine with 3 walls, you might want to increase to 4 or 5 walls to get even more rigid print and it won't increase the use of filament or time that much.
Category: 3D Printer Accessories