Phrozen Arco Poop Catcher
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Poop tray for the Arco printer. Can be placed behind the printer on the table and secured with 3 ps. Ø12 mm. magnets.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 185
- Makes
- 0
- Views
- 556
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
A poop collection tray designed for the Phrozen Arco printer.
Can be placed behind the printer and snaps with magnets to the plate below the poop exit.
A foot that goes under the printer has been added and makes it easy to place the tray next to the hole.
Uses 3 pcs. Ø12 mm. magnets. (can be omitted)
Print instructions:
Nozzle size: 0.4mm
Support: Not required
Material: PLA is fine,
Wall loops: 2-3
Top shell layers: 2-3
Bottom shell layers: 2-3
Infill: 10-15%
Additional parts: (Can be omitted)
3 ps. Ø12mm magnets (1-3mm thick)
Glue to fasten the magnets