1 / 2
Medium-sized hammer (8 oz / 225g) Honeycomb Storage Wall HSW Holder (Fusion 360 and STEP files included!) — zdjęcie 1
1 / 2

Medium-sized hammer (8 oz / 225g) Honeycomb Storage Wall HSW Holder (Fusion 360 and STEP files included!)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Attaches my GeeTee 8 oz hammer, maybe even yours, to my HSW.

Ocena
0 / 5
Polubienia
2
Pobrania
30
Wydruki
0
Wyświetlenia
117
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Print this in the orientation shown below (no supports needed at 0.25 mm layer height).

You will then need 3 M3-nut inserts. I used M3x10 screws. Printed out of PLA, 5 walls, 15% gyroid infill.

The 3 nut-inserts go like below

Then

Tagi