1 / 2
Medium-sized hammer (8 oz / 225g) Honeycomb Storage Wall HSW Holder (Fusion 360 and STEP files included!) — image 1
1 / 2

Medium-sized hammer (8 oz / 225g) Honeycomb Storage Wall HSW Holder (Fusion 360 and STEP files included!)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Attaches my GeeTee 8 oz hammer, maybe even yours, to my HSW.

Rating
0 / 5
Likes
2
Downloads
30
Makes
0
Views
118
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Print this in the orientation shown below (no supports needed at 0.25 mm layer height).

You will then need 3 M3-nut inserts. I used M3x10 screws. Printed out of PLA, 5 walls, 15% gyroid infill.

The 3 nut-inserts go like below

Then

Tags