QIDI Q2 / Q2C Minimalist Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A riser for Qidi Q2 / Q2C for those without the box. No support needed during the print.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 540
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
QIDI Q2 Minimalist Riser – Lightweight & Support-Free
I designed this riser for my QIDI Q2 because I wanted something lighter and more cost-effective than the "tank-like" models available. If you want to save filament and skip the hassle of supports, this is for you.
Why choose this model?
No supports needed: I only used "mouse ears" brims for the joints.
Lightweight & Fast: Save filament and time without sacrificing functionality.
Full Ventilation: Features vents on all sides (yes, including the back!).
Perfect Clearance: At 45mm height, it provides enough room for the PTFE tube to move freely - no more rubbing against the glass lid.
When should you pick a different model?
If you plan to put heavy stuff on top, like the QIDI Box. This model is NOT designed for that.
If you simply don’t like the minimalist aesthetic.
The "Lightweight" Reality
Is it less massive than other models? Yes. Does it have a bit more flex? Sure. But it gets the job done without wasting half a spool of filament. Once it’s on the printer with the glass in place, it’s steady and does exactly what a riser should do - lets the heat out without the bulk.
⚠ A Note on Weight & Strength: Orca Slicer calculates the total weight at around 370g. Please remember this is a minimalist design. It’s perfect for the glass lid, but it wasn't built to hold heavy accessories. Let’s keep it light!
Assembly & Parts
The riser consists of 18 elements that are easy to put together. There are files for 2 plates to download but also you can download files for each element separately, then you will need to duplicate some of them.
List of elements to print:
Base: Front Left (1x), Front Right (1x), Back Left (1x), Back Right (1x)
Joints: 4x (to connect the base sections)
Vent Covers: 4x Left, 4x Right (one of each for every base section)
Lock Levers: 2x
My Print Settings
Material: PETG
Supports: NONE
Infill: 15% Adaptive Cubic
Walls: Arachne with 2 loops
With those settings, Orca calculates total weight of filament used to be around 370g.
Feedback & Ideas: I’m all ears! If you have any suggestions or improvements, feel free to leave a comment or post a make. I’m open to feedback and always happy to see your prints!