P
Printables3DMakerNoob
Clearance Tolerance Test
Inpired by Maker's Muse's tollerance tests, this is a smaller version to test your printer clearance capabilities
- Pobrania
- 76 106
- Polubienia
- 7193
- Ocena
- 4,95
Wyniki wyszukiwania: clearance
Liczymy pasujące modele…
P
Printables
Zero Clearance Insert for Hercules 10" Table Saw
Zero Clearance Insert for Harbor Freight Hercules 10" Table Saw This is a zero clearance insert for the Harbor Freight Hercules 10 inch table saw. You will need to cut the blade slot for the table saw first until the riving knife begins…
P
Printables
Door Frame and Bolts with more clearance for easier installation
Door Frame and Bolts with more clearance for easier installation. In door frame i cut the slides a little bit and alt the bolts I made the space in the slides bigger.
P
Printables
Sawstop CTS 0 clearance plate
This is a replacement of the OEM throat plate for the Sawstop CTS. Basically copied the measurement of original saw, connected the split rear end of the OEM design, and made a easier to keep flat zero clearance plate. There are split…
P
Printables
Makita LS1220 mitre saw zero clearance throat plate insert
This remix of Clifton McMorris' (@CliftonMcMor_1416112) model has several key improvements: Solid kerf cut area in the middle of the print provides a clean and dense area for the sawblade to cut the initial kerf Increased height (scaled…
P
Printables
Bosch PCM 8S sliding mitre saw zero clearance inserts
Zero clearance inserts for Bosch PCM 8S sliding mitre saw. Inserts are intended to use only when saw is in vertical position, for other angles please use original inserts. For dimensions please see diagram, printer with table at least…
P
Printables
Central Machinery Band Saw Zero Clearance Insert
These are two zero clearance inserts for the Harbor Freight Central Machinery 9in Band Saw. I did have to lightly sand the edges for it to have a snug fit.
P
Printables
SV06 better fan clearance left Z block
Modified to remove the bottom corner edge to provide more clearance.
P
Printables
SV06+ Filament Runout Sensor and Bracket Max Clearance
Remix to move the sensor to a higher position on the printer. Added cable tunnel with Print Bridges that can be removed after printing with a sharp knife. (see pic) Added Trimmable Print Supports on bracket angle that can be removed after…
P
Printables
Hero Me Gen 7 Neptune 3 Pro Internal Support with Screw Clearance
Thanks MediaMan3D for the original design
P
Printables
Axial SCX24 High Clearance Suspension Links - Gladiator/Power Wagon
Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the SEMA links on Cults. V1 and V2 have identical footprints/outlines – the only…
P
Printables
Axial SCX24 High Clearance Suspension Links - Deadbolt / Betty
I HAVE NOT TESTED THIS ONE YET, PLEASE LET ME KNOW IF IT NEEDS ADJUSTMENT Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the…
P
Printables
Modeling Helper - Clearances, Chamfers, Fillets
A handy physical reference to have on your desk while modeling. All numbers in mm The lowest clearance slider might be permanently stuck. This is to be expected, as that low a clearance is generally too little for reliable movement.…
P
Printables
Prusa CORE One Snap-in Corner Block/Plug (Door Clearance remix)
The original corner block interfered with a fully opened door. Attached are files for standard core ones (hinge on the left side) and for those who have switch to right hinged.
P
Printables
UK Double socket desk clamp with 20mm extension on height for mains plug clearance
UK Double socket desk clamp with 20mm extension in height for clearing wires for mains plugs
P
Printables
Knurled screw knob (low clearance & filleted & short head) for Copanko Spool holder
I reaaly like the knurled screw desing from @Calmly and the remix by @D1ngsbums, but space is limited in my setup. This version has short head which is around 6mm shorter than the original version. It is not as easy to grab as the…
P
Printables
Gaggiuino Gen 3 Screen Housing – Improved Water Clearance (Remix)
This is a remix of the original Gaggiuino Gen 3 screen housing by Loogle. All credit for the base model goes to the original creator. I made this version because the original housing sits very close to the water area on the Gaggia…
P
Printables
Voron Trident Panelmount with Clearance
Voron Trident Panel Mounts – Improved & Clicky Clack Door Optimized Remix This is a remix of the existing Voron Trident panel mounts with clearance , focused on improving usability, structure, and compatibility — especially when used…
P
Printables
PIP Fidget Wanky Clearance test , quick 48 min print
# How To Use: The number Wanky's hiding is the current clearence level , make sure it hides the number completly # Info: ranging from change in rod diameter from max at base 0.8 mm (0.0314961 inch) to zero OR face offset of 0.4 mm…
P
Printables
Festool Kapex Zero Clearance Insert
Festool Zero Clearance Insert – Precision cuts with maximum safety! Print your own Festool Zero Clearance Insert for cleaner cuts, higher precision and maximum safety. Cleaner cuts: Minimizes tear-out and splintering for flawless edges…
P
Printables
BTT SFS 2.0 - 2020 Horizontal Feed, with Panel Clearance
Mounts a BTT SFS 2.0 on a vertical (or horizontal) 2020 rail, and still allows panel removal. The sensor feeds filament perpendicular to the mounting rail
P
Printables
Oui Skadis Jar Mount - Adjusted Tab Clearance
Oui Skadis Jar Mount - Adjusted Tab Clearance Printed in PLA with organic supports everywhere (to support rim and tabs) First layer height .12 mm, Other layers .2mm
P
Printables
Bambu X1C / P1S / P1 Hotend Stealthburner Printhead Press Fit Only + Wire Clearance
This adapter does not need the difficult to install heat set inserts. It also removes material that can be used for cable clearance so I did away with the redundant mounting holes and added cable clearance and a pathway to snake the…
P
Printables
LCR 4 Case - simple, large clearances, no supports
There are a large number of cases for the various versions of the LCR tester on this site already, but I couldn't find one that fit what I wanted. This version is a simple design, with rounded edges, which is screwed together, and can be…
P
Printables
Zero Clearance Insert for Carbatec Table Saw
There are two models here. V3 is slightly larger than V2 to account for a small amount of plastic shrinkage. V2 is the exact size. See it installed and tested here
P
Printables
Bearing clearance test / massage tool
I wanted to test a different way how to put bearing in the design so I created this spinner and accidental massage tool. Bearing used: https://vi.aliexpress.com/item/32717527870.html Can be adjusted for other ones easily - Fusion 360 file…
P
Printables
Ender 3 V3 SE - Creality Light Bar S1 Extended with Clearance
Great original model. Printed a max height print and the extruder arm broke the clips. For Creality Light Bar S1 variant, I enabled full height of the Ender 3 V3 SE to clear the extruder arm lever. Follow install instructions from…
P
Printables
Zero Clearance Plate for Carftsman Table Saw
This print is for a zero clearance plate for a dado stack of up to 3/4". The plate itself was designed for my old craftsman table saw for 10" blades. The dado stack I use us smaller at 7 and ¼" I believe or 8". It is split into 2 parts…
P
Printables
Mini Satsana Remix - Ender 3 V2 w/BL/CR Touch Mount and Creality Linear Clearance
Upgraded my Ender 3 V2 that had a mini Satsana on it, but needed clearance for the Creality Linear X kit. I just clearanced the area I had to end up drilling out for the first one to fit. This one fits nice and snug. Print it in PETG.
P
Printables
Metabo KGS216M Zero clearance insert
My KGS216M is an older version with different shape than the current version.
P
Printables
Low-clearance Skadis mount for nightstands
Backstory I wanted to have some things easily grabbably reachable while in bed, e.g. bluetooth keyboard for watching movies from bed. So I decided to attach a Skadis to the side of my nightstand. Model This mount attaches into the right…
P
Printables
LED Clearance Light Corner Mount- Toolbox Lighting
Designed these to mount the cheap 3/4" white LED truck clearance marker lights in the corner of truck toolboxes for night area lighting. Amazon.com: Nilight 10 PCS 3/4 Inch Round LED Clearance Light LED Front Rear Side Marker Indicator…
P
Printables
Crosswind Mini 1600 Servo Trays for 17G Sized Servos - Updated for better linkage clearance
I had some ProModeler DS100DLHV micro servos laying around and wanted to use them in my Mini Crosswind. The servo trays are slightly bigger than the original so you will need to trim some foam to use them. They're 1mm wider and 5mm longer…
P
Printables
Better Screw Install Clearance Dyson Accessory Wall Bracket 3 tools
A remix of the Dyson Accessory Wall Bracket for 3-tools. I had issues with installing my screws in the original design, and I thought the screw size that fit was a bit too small. Most consumer install kits come with #8 screws, so I…
P
Printables
Clearance Ring W/ Gauge Peg
This ring has 9 different clearances on it, each starting at 20mm diameter in the center and moving up .2mm with each clockwise circle. The Peg is 20mm in diameter and 30 in height so you can also use it as a gauge tool of you're printer…
P
Printables
Extra clearanced Open Belt mod
I have opened up the back of the belt path between the belt and the extrusion for extra clearance after experiencing slight belt rub on the stock clearance.
P
Printables
Klipper Expander Thermistor clearance
Klipper Expander Cover with clearance for the Thermistor terminations as to prevent pinching the connectors when in closed. this print is really dependent on tollerances so can recemend you slightly scale down the model as i have found it…
P
Printables
Garmin Varia Quarter Turn Rack Mount *Remix* with more clearance
The original model worked perfectly for me as far as affixing the radar to the printed model is concerned (with a satisfying “click” once in place), but it caused the Garmin Varia RTL515 to collide with the fender on my bicycle/rack…
P
Printables
Craftsman Zero Clearance Insert
I designed an insert for my older model Craftsman table saw using the SCAD model by GmEyedDvi and split it in Fusion360 so I could print it on my 10" printer bed. I moved the magnet mounting holes to correspond to the wider ledge on my…
P
Printables
AEG Mitre Saw Zero Clearance Throat Plate Insert
Throat Plate Insert I made for the "AEG 10" Dual Bevel Slide Compound Miter Saw (Model PS254DB) The insert is split into two identical pieces to fit most print beds. Together, they form a perfect replacement for the stock throat plate,…
P
Printables
radiomaster boxer folding antenna more clearance
The original has a width of 11mm, I expanded it to 15mm because my antenna has a larger middle.
P
Printables
Zero Clearance Throat Plate for Laguna Fusion F1/F2/F3
Upgrade your Laguna Fusion F1/F2/F3 table saw with this customizable 3D printed zero clearance throat plate. Easy assembly: Designed to fit a standard 220x220mm print bed in two pieces for efficient printing. Hardware Compatibility:…
P
Printables
Enhanced Zero Clearance Throat Plate for Laguna Fusion F1/F2/F3 with Improved Dust Collection
Upgrade your Laguna Fusion F1/F2/F3 table saw with this customizable 3D printed zero clearance throat plate, now featuring enhanced dust collection . Improved Dust Extraction: Additional air holes strategically placed throughout the…
P
Printables
CLEARANCE TEST
use your current/most used print settings to see what clearance you need cylinder Z shows what clearance you need for a part printed on the Z axis cube Y shows what clearance you need for a part printed on the Y axis cube X shows what…
P
Printables
Pop-up Gift Card Box - Larger Clearance
Alternate latches for the Pop-up Gift Card Box with larger filament holes. The original latch files have 2.2mm holes and are made to be a tight fit with 1.75mm filament. These latches have 2.6mm holes, which will more easily accept 1.75mm…
P
Printables
Tire fit/clearance gauge for 559/584/622 ( 26"/650b/700c)
Whether you're contemplating a change of wheel size, or just want to know the maximum tire size that will fit in your frame or fork with your current wheelset, this tool will remove the guess work.* Based on the idea of the checker…
P
Printables
Alternative top mounting parts for better clearance
Mounting parts modified to no protrude towards the front of the frame in order to no interfere with the printhead
P
Printables
Scheppach HBS 32 vario zero clearance insertion
English The HBS 32 vario band saw from Scheppach has a round plastic table insert. This naturally wears out during normal operation. Fortunately, some spare parts are still available for this old machine from the early 1990s. Parts such…
P
Printables
Creality Halot Mage Pro Magnetic Bed Clearance Bracket
After the instalation of a magnetic bed in the Creality Halot Mage Pro, the leveling process pushes too much the bed in the resin vat and the screen. I designed a bracket to give it more clearance in the screws to compensate for the extra…
P
Printables
Delta 36-725 T2 Throat Plate (Zero Clearance Insert)
Parametric model designed in OnShape to create a tight fitting zero clearance insert for my Delta 36-725 T2 table saw. I printed in PLA with 15% infill and 100% infill for the area in the blade pocket to provide added support after the…
P
Printables
SCX10 Skid Plate. High Clearance, Flat Bottom
Center skid plate for the Axial SCX10 RC crawler. This gives you a little more ground clearance to prevent getting hung up. This skid plate DOES affect link geometry slightly. There are 2 version, once for the stock links using Axial…
P
Printables
Grizzly G0555 Bandsaw Zero clearance Table insert / throat plate
Grizzly G0555 Bandsaw Zero clearance table insert. This file has a notch to keep it from rotating. Two versions. One solid and one with ventilation holes for setups with dust collection.
P
Printables
IKEA Mosslanda Hock & Clip (FIXED size and clip clearance)
A quick remix of the clip and hook to be fit more snuggly with the shelf.
P
Printables
Zero Clearance Insert, Miter Saw Plate, DW715
I created a zero clearance insert to replace the standard stock insert on my DW715 Dewalt Miter saw. This one has been in use for a few months now and doesn't show any serious signs of wear. It requires a long bed (I have a prusa i3), but…
P
Printables
Original Prusa Enclosure xLCD Holder for MK4S with PE Cable Clearance
This has a cut out on the right side so it doesn't interfere with the PE cable when installing. Prusa calls the xLCD with the PE cable located there the “newer” version.
P
Printables
voron 2.4 purge bucket with bamboo a1 mini brush clearance for whoopingpochard kenimatics
use "voron bedpan" lower parts. i only made the bucket. Voron BedPan for Kinematic Bed Mount by TTR | Download free STL model | Printables.com im switching to beacon so the brass brush had to go. six 6mm x 3mm magnets are needed. my…
P
Printables
Prusa Mini display backplate with Solder Point Clearance
I had a Prusa Mini Display that seems to be a different revision (despite label showing same model number) which has through hole components which results in solder points on the backplane. On my Day 1 Mini, there are no through hole…
P
Printables
Kobalt TS10601 table saw Zero Clearance Insert Plate
This is a blank plate for a kobalt table saw. There is a pre made cutout for the riving knife. Need to insert 4 - 5mm threaded inserts into the 4 holes along with 4 grub screws to level the plate. I used PETG on a 400 x 400 bedslinger.…
P
Printables
Thermaltake Tower 500 - Bigger GPU Clearance
Enhanced plate design for larger GPU compatibility, ensuring seamless installation while preserving the case's aesthetic
P
Printables
Open Ball - Clearanced Vise Adaptor Plate
I noticed that it was difficult to remove the screws if I wanted to pull the bearing out, so I made a modified version of the vise adaptor plate with some small cutouts to clear the screw heads. I also had to modify the bearings to allow…
P
Printables
Ender 5 S1 Low Clearance Panel Clip
I am adding additional bed supports for my Ender 5 S1 and the panel clips run into the linear guides that I am using. I needed something that would clear the panel clips, so I came up with these. Mount with the provided M5 screws and M3x6…
P
Printables
Prusa i3 MK3 LED Light strip Brackets Extra Clearance
Over a year ago I purchased a very cheap LED Strip Light that’s still available on eBay, my original design worked on my Prusa MK2, however over the past year I have upgraded to the MK2.5S and change the Extruder to the revision 3 design.…
P
Printables
Axial SCX24 Lexus GX470 / Deadbolt 4 Link Conversion + High Clearance Links
High clearance front and rear and 4 link conversion set of links for the SCX24 Lexus GX470 and Deadbolt (rear links will not fit Deadbolt, see linked original for rear links that will fit). There are two versions of front links - standard…
P
Printables
Metabo KGS 216 M Zero clearance insert
I could not find a zero clearance insert for my 2023 Metabo KGS 216 M as the old versions differ. I have included both the entire model as one piece and a version consisting of 2 parts for printers with a smaller print volume. Print the…
P
Printables
Collapsing Clearance Test Print
This print is used to gauge your success when printings a print-in-place collapsing sword or lightsaber. Each ring has a different amount of clearance. How many rings are free after printing will tell you what clearance your printer is…
P
Printables
Metric Screw Clearance Calibration Plate
This is a plate designed to print every hole from 2.0mm to 8.9mm in 0.1mm increments. Pictured are a 3D printed version (pink) and an acrylic laser cut version (black). The cutout orientation corner is the top left. Holes increase from…
P
Printables
DWE7485 zero clearance plate halved
I created this to allow for print on my smaller printer (Bambu P1S) and to then assemble with screws. Added a solid bar across the middle with 2.5mm holes for m3 screws to thread the pieces together or a narrower bar to use an m2 screw…
P
Printables
Minecraft Lantern - Light/Lamp - No supports with clearance
see also: https://www.printables.com/model/1118937-minecraft-chain-for-lantern-nearly-no-supports
P
Printables
Voron 2.4 / Trident Panel Mounts with clearance
Voron Panel mounts with clearance at backside and to the gantry.
P
Printables
Remix: Case insert for Infiray P2 Pro by mikeselectricstuff, With clearance for larger 90 deg USB C connector
I wanted to use a female - female duttek 90 deg connector as I'll have an extra from the gopro P2 Pro case.
P
Printables
Partial Clearance Tolerance Test
A smaller clearance test with only 0.1mm and 0.15mm. Allowing you to fine tune your printer faster.
P
Printables
Ender 3 V3 KE cable holder best fit (without clearance)
Best fit for Ender 3 V3 KE. Designed without clearance. Does't move by itself. Printed in PLA.
P
Printables
Zero Clearance insert Metabo KGS 254 M (2023)
Same model but in one piece, for larger build plates.
P
Printables
Print in Place 45mm Folding Cube - 0.5mm Clearance
My 6yo saw one of these on Thingiverse and wanted me to print it for him. Unfortunately the tolerance on that other model was 0.2mm - too tight for my printer. So I created my own with a 0.5mm tolerance and it works great. Exterior…
P
Printables
Stylish Print-In-Place 110mm Hinged Bag Clip - 0.5mm Clearance
My own take on the typical bag clip. I've found that this length (~110mm) is the most useful for me. The pattern on the front and back means my wife appreciates them more.
P
Printables
Articulated Lizard with Rotated Ankles, Improved Clearances and easy to print
The original model has a description of the designer's goals - well achieved! But there is no need to do anything fancy to make this model print - slice it and print it. No supports, no brim (on my Prusa i3S Mk3 with PLA). If you happen…
P
Printables
Festool KSC60 Zero Clearance Insert
I have created a zero clearance insert for the Festool KSC60 sliding compound miter saw. I have added the .stl file as well as some print files for the Prusa mini. which you can just glue the pieces together. The print files are 100% fill…
P
Printables
Low Side Clearance Bambu X1C P1S Purge Chute Bin
This purge chute bin catches the Bambu X1C or P1S “poops” and is designed to fit placement of printers with minimal (near-zero) side clearance. It also features a sight gauge on the side to quickly see how full the bin is. Printing: 0.4mm…
P
Printables
1610 bed lift plates for underbody sliders and better ER11 clearance
Combined with some 50mm tall feet (like this: https://www.thingiverse.com/thing:2250758 ) these blocks allow the 1610 Y axis rods to be re-mounted below the frame rail. and the bed brought back up to a sensible height. Perfect if you are…
P
Printables
NVIDIA Tesla P40 Radial fan shroud (flipped for clearance)
Flipped version, for clearance to motherboard. If clearance is not needed, the other version is preferred. (check other version for pictures too) Please consider reporting back if this worked for you. At least one reply please! ========…
P
Printables
Zero Clearance Mitre Saw Station for Digital Reader
I designed a Zero Clearance Mitre Saw Stop block. Using a digital reader, along with some aluminium bars and T-Track. Build video can be seen here:
P
Printables
Zero Clearance Insert for Hercules 10" Table Saw
Zero Clearance Insert for Harbor Freight Hercules 10" Table Saw This is a zero clearance insert for the Harbor Freight Hercules 10 inch table saw. You will need to cut the blade slot for the table saw first until the riving knife begins…
P
Printables
PARAMETRIC MAGNET CLEARANCE TOLLERANCE TEST
Simply go to “change parametres” in Fusion 360 and add your desired magnet size, the rest just adjusts itself. The sizes go from smallest clearance where the cut out is on the left to largest (no cut out) on right. If you decide to get a…
P
Printables
BFPTouch Remix - Ender 3 NG clearance friendly
just some hot swap remix for people who used BFP a lot on ender 3 and got some plan to convert it into ender 3 NG
P
Printables
QIDI Plus 4 foot support for extra bottom clearance
The QIDI Plus 4 power supply is located at the bottom of the printer and it needs plenty of airflow to remain cool. If you have the printer on a carpeted surface, then the carpet can restrict airflow and the printer will shutdown to save…
P
Printables
Two Table Saw Push Sticks (1/4 Inch and 1 Inch Blade Clearance)
These two table saw push sticks are designed to save you from ordering plastic junk online. The 1 inch clearance stick can push a ½ inch or taller piece of material through the saw and it can be flipped over to use the “unicorn horn” if…
P
Printables
Extended PTFE (PC4-M10) Quick-Fittingfor Prusa Drybox w/ Base with more Clearance, Fixator for Drybox
It is the Same as the original, but with 1mm more clearance at the joining parts, what makes this easyier to connect.
P
Printables
Makita LS1016L Zero Clearance Throat Plate Insert
I designed this insert to be heavy-duty; it has an internal support—designed to be printed solid—that surrounds the kerf cut. Print this as an assembly to retain the ability to print the support part as a solid inner piece. Enjoy! Print…
P
Printables
Craftsman Folding Miter Saw (CMXEMAR120) Zero Clearance Insert
This is a zero clearance insert for a Craftsman 10" folding miter saw (Model# CMXEMAR120). To use it, you print and install it in place of the current insert. Once installed, you run the saw and use the saw blade itself to cut the slot.…
P
Printables
SillyPilot - More Ejector Clearance
I noticed the ejector was just a bit too small and it prevented 5x elite silly shells from firing. Now it's widened a bit so they should fire no problem! (If a bit weak… because its just a pilot plunger volume)
P
Printables
Hole Clearance Test Board Big
The smaller and original version is from Alexandre Chappel and is available here for free: https://www.alch.shop/shop/p/hole-size-test-boards
P
Printables
Top rail, more clearance for screws
Added a small gap on the top rail STL to allow clearance for the screws.
P
Printables
Metabo TS254M Zero Clearance Insert
Gedruckt in PETG. 4 außenwände 30% infill 0,2mm Layerhöhe. Ich habe das Glück dass ich einen Drucker mit einer 350x350 Druckplatte habe und konnte das Teil am Stück drucken. Ich habe aber eine version erstellt die in 2 Teilen gedruckt und…
P
Printables
ESP32-S3 Camera Mod for CORE One with heatsink clearance
Seeedstudio now ships the Xiao ESP32-S3 Sense camera with two small heatsinks to reduce chance of overheating. These heatsinks are ~4.5mm too tall for the model. This remix cuts a 25mm x 15mm hole in the base to provide clearance for the…
P
Printables
Dewalt 705 0-Clearance Insert
This is a Dewalt 705 (older model) miter saw zero clearance insert. Print this part, assemble into miter saw, and make first cut for zero clearance slot.
P
Printables
High Clearance CR10 OEM Fang Mod for opposite heatsink
This is a remix of the High Clearance CR10 OEM Fang Mod. This can be easily installed also in the cr 10(s) that has the heatsink assembled in the opposite direction. You can print this without supports. Print Settings Printer: Creality…
P
Printables
Higher Clearance Tool Head Connector
This is a remix of the Ender 3 Improved Cable Chain for All Axis , designed to provide additional clearance for larger direct drive setups . If you're upgrading to a bulkier extruder assembly, this modified toolhead connector ensures the…
P
Printables
High Clearance Mod for Thumper RC 4X4 Crawler
This mod only works with the [Cheater B540C transmission] included here. [B] is the gear ratio [540] is the motor mount, [C] stands for Clearance. If you are serious about crawling a Thumper model, this transmission and frame setup…
P
Printables
Simple Box with Print-in-Place Zero-Clearance Vertical Chevron Hinge
Warning: I haven't printed this one yet, so it might not turn out great. This hinge design turned out absolutely excellent on a different project. Sadly I lost the files for that one, but I put this here to share.