Clearance Coin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fast & Small Clearance/first layer test
- Ocena
- 4,8 / 5
- Polubienia
- 31
- Pobrania
- 560
- Wydruki
- 7
- Wyświetlenia
- 1979
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Clearance test that should be fast and should not consume a lot of plastic.
This should take less than 10 min with 0.2mm L.H. 50mm/s and less than 2 Grams of plastic.
This is measuring clearance from 0.05mm to 0.5mm.
I had to design this in order to fix my first layer clearance (to fix the elephant foot/clearance among print in place moving part).
Before attempting this test:-
-make sure you have calibrated ( leveled ) your bed to the best you can.
-make sure your printer retraction, speed, dimensional accuracy, and horizontal expansion are calibrated.
-try to print this with PLA (dry good enough) With no heated bed or Glue to get the best result.
- please USE IT WITH CAUTION AND AT YOUR OWN RISK:-
if the bed isn't calibrated well ( leveled ) nozzle/bed/build surface may be damaged ...
Good Luck.
Print Settings
Printer Brand:
Monoprice
Printer:
Select Mini
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
top/bottom layers 0.8mm / 0% infill
Filament: ANY PLA any
Category: 3D Printing Tests