Filled Clearance Tolerance Test (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simply filled the internal hole to be able to easily add text.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 483
- Wydruki
- 4
- Wyświetlenia
- 2206
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I quite like this Tolerance Test by 3DMakerNoob but sometimes I like to add notes directly on the prints when doing some setting tests.
The original model shape was too limiting due to all the curves so I simply filled it.
Material consumption and printing time is just slightly increased.
The only con would be that it cannot be printed with 0% infill.
Also I find I got better visual results by printing with Arachne on.
Simply sharing in case it's helpful to someone else.
(so you can avoid adding a bunch of shape in the slicer like I did the first time)