Philips 276e8vjsb 4k monitor 75mm VESA adapter. Cable clearance and hardware fit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Philips 276E monitor 75mm VESA mount with off the shelf hardware to fit well and allow tightening.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 273
- Wydruki
- 3
- Wyświetlenia
- 1244
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I ended up re-modeling this adapter to 75mm x 75mm only and moving the VESA mount down to give clearance to the Display Port cable.
Made to fit hardware and allow final mount assembling after monitor is reassembled.
It is a tight and secure fit and a great design. Props to @KarolNI
Printed on an Ender 3 Pro. .18mm layer heights. 50% infill.
All hardware used is from Home Depot. Hardware needed: ($3.91)
Monitor sheet metal mounting brackets to 3D printed “Internal Mount”
1x M6 X 60mm (Home Depot 165 904) ($2.75/2)
2x M6 Washers (Use from existing mount)
1x M6 Nylock (Use from existing mount)
3D printed “Internal Mount” to “External Mount”
2x ¼-20 x 1.5 (Home Depot AED $.25/ea)
2x ¼ small flat washers (Home Depot AEC ¼ Stainless Steel washers are Ø.6235 $.28/ea (Zinc washers are ~Ø.75")
2x ¼-20 hex nuts (Home Depot AAB $.11/ea)
3D printed “External Mount” to VESA Mount
4x M6 x 12mm bolts (Mine came with monitor arms)
4x M6 Nylocks (Home Depot 1008 004 775 $1.25/4)
SolidWorks 2020, Step, and STL file in Zip folder