1 / 3
5‑to‑1 Filament Hub with PC4‑M10 (1.25 mm Pitch) for Kobra S1 — zdjęcie 1
1 / 3

5‑to‑1 Filament Hub with PC4‑M10 (1.25 mm Pitch) for Kobra S1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model was created because existing 5‑in‑1 filament hubs did not offer a PC4‑M10 variant with a 1.25 mm thread pitch

Ocena
0 / 5
Polubienia
3
Pobrania
39
Wydruki
0
Wyświetlenia
252
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This model was created because existing 5‑in‑1 filament hubs did not offer a PC4‑M10 variant with a 1.25 mm thread pitch. To fill this gap, I designed my own hub from scratch, keeping only the standard PC4‑M10 interface to ensure full compatibility with common Bowden fittings.

The geometry, structure, and layout are entirely original, providing a reliable and easy‑to‑print solution for multi‑filament setups, dry boxes, and AMS alternatives.

For best performance, I recommend using the lowest layer height your printer can reliably achieve, as smoother internal walls help reduce filament friction and improve overall flow consistency.

Optimized for makers who need a true PC4‑M10 (1.25 mm) hub that simply didn’t exist among available models.

Tagi