5‑to‑1 Filament Hub with PC4‑M10 (1.25 mm Pitch) for Kobra S1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model was created because existing 5‑in‑1 filament hubs did not offer a PC4‑M10 variant with a 1.25 mm thread pitch
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 39
- Makes
- 0
- Views
- 255
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model was created because existing 5‑in‑1 filament hubs did not offer a PC4‑M10 variant with a 1.25 mm thread pitch. To fill this gap, I designed my own hub from scratch, keeping only the standard PC4‑M10 interface to ensure full compatibility with common Bowden fittings.
The geometry, structure, and layout are entirely original, providing a reliable and easy‑to‑print solution for multi‑filament setups, dry boxes, and AMS alternatives.
For best performance, I recommend using the lowest layer height your printer can reliably achieve, as smoother internal walls help reduce filament friction and improve overall flow consistency.
Optimized for makers who need a true PC4‑M10 (1.25 mm) hub that simply didn’t exist among available models.