Bore guide to suit Howa 1500 .308
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bore guide to assist cleaning for a Howa 1500 chambered in .308
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Bore guide to assist cleaning for a Howa 1500 chambered in .308 Winchester. I tried an existing model to suit .308s but primarily designed for the Remington 700, and found the diameter to be a few tenths of a millimetre too large for the Howa. So I decided I would make my own specifically for this rifle.
Do note that when printed to exact dimensions it could be a little tight because of the protrusion of the print seam. It should take only a few moments with some sandpaper to fix that. The design has almost identical clearance to the bolt, which is fairly significant.