Bore guide to suit Howa 1500 .308
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bore guide to assist cleaning for a Howa 1500 chambered in .308
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 90
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Bore guide to assist cleaning for a Howa 1500 chambered in .308 Winchester. I tried an existing model to suit .308s but primarily designed for the Remington 700, and found the diameter to be a few tenths of a millimetre too large for the Howa. So I decided I would make my own specifically for this rifle.
Do note that when printed to exact dimensions it could be a little tight because of the protrusion of the print seam. It should take only a few moments with some sandpaper to fix that. The design has almost identical clearance to the bolt, which is fairly significant.