Counting matching models…
English The 3D4U Borehole Cleaning Aid ensures that your hands are free when working with a drill. Mounted on the hand-piece, this accessory automatically secures itself to the wall. For this purpose, the base plate was optimized for the…
SHIP ABANDONED ICEBREAKER LOD LEDOBOREC
Here's an improvement of my other shaker model that I have. Threaded caps and also a pillar in base to agitate salt and pepper and hopefully prevent clumping. Primer just pops in, tapered end in first. Also have a case with no primer…
Here is a 2 bore cartridge replica. I used PETG but would print better with PLA. I dont have many colors so gray was chosen. Comparion rounds in photo are 300WM and the big 50.
What to do when you're sitting at home, well to me that answer is clear. I want to build stuff! And when it comes to building stuff at home I love to use cardboard or 3D printing, so why not both. So I wanted to create a modular system to…
Timing Pulley GT2 20 teeth Bore 8 mm Body dia. 16 mm Body length 16 mm Belt width 6 mm
B.B.B.B - Locked, loaded, and scaled to perfection! The BIG BORE BULLET BOX is a 10x upscaled replica of a real 9x19 mm cartridge, precisely engineered down to the hundredth of a millimeter . Every radius, angle, and dimension has been…
Tech Deck-Finger Bored Skate Park Does not need to be scaled up or down. It is fully usable with tech decks. I also recommend using blue tack to prevent skate parks movement. Resolution: I used 0.3mm but I recommend using lower like 1.5mm…
Here you can download the drill hole extractor for an AEG vacuum cleaner. This sucks itself onto the wall so that you have both hands free for drilling. The original handle can be too heavy for this, so I have added a micro handle.
This is a remix of thing:5158444 that I modify to suit my need the original design is working ok, but I want to simplified the 3D model.. I'm omitting the screw-assembly and opt for glue-assembly only, adjusted the locking-tab and notch…
A well-known AR15 cleaning tool. Now available for 3d print. Fits perfectly if printed 0,15mm or less. If necessary, sand a little internal hole with 600 paper grit. Attached as a one part and cuted into two pieces with connector - for 3d…
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
This uses four m3x8 screws and a gt2 20teeth timing pulley with either 8mm or 5mm bore The front "lip" of the gt2 20t pulley will pop off easily with pliers make sure to keep pressing on the gt2 20t pulley while securing the screws. I…
These dart cups for the 0,625" Cold Steel Big Bore blow gun are designed for 3mm steel wire. Purchasing 3mm wire and cutting them by hand is much cheaper compared to the darts made by Cold Steel. The original darts have a diameter of…
CZ 457 Bore Cleaning Guide With Bolt Catch.
"It's... the Borealis ?" "Good god." "What? The Borealis? It's real?" Well it sure is now. More exactly the version seen in Half Life 2 Episode 2, which is heavily based on the USCGC Healy icebreaker instead of the Polar-class ones. I…
Simple Trombone moustache for any small bore trombone mouthpiece Printed with tree supports and raft, taking around 30 minutes and 1.5 meters of filament. Printed mine at 1.5mm layer heights, but any will work.
A .410 bore shotgun shell, also known as .410 shotshell, is a centerfire shotgun cartridge. Centerfire shotgun shells were designed in the mid 1800s. Includes 2 lengths: 2 1/2in (most common, 2.5in, 60mm), and 3in (72mm). Note: Shotgun…
I'd call it medium difficulty because despite being a very simple model there are some things you need to do to convert it to a playable musical instrument, the same as pretty much anything you would print out with the goal of making…
***DESIGN UPDATED & IMPROVED 5/2/2022*** Needs strong magnets with dimensions - 1.26 inch [32mm] x 0.08 inch [2.03mm] Two stacked magnets (x2) needed for magnet bar (green in photo) that sits outside habitat. Two stacked magnet (x2)…
2GT 20T Pully with 5mm bore that I optimized to be printed and use M3 heatset inserts. Highly recommend printing in ABS or better. Additional parts needed per pully: M3 grub screws (x2). M3 heatset inserts (x2).
Cold Steel .625 Big Bore Blowgun Grip with 5 Slot Picatinny Rail Materials Needed: 2 - M3 SHCS 2 - M3 Nuts Optional: Picatinny Mountable Laser for increased accuracy! Print Recommendations: Print with something strong if possible,…
Boreas Abduction Orithyia. The north wind Boreas was in love with Orithya, the daughter of the king of Athens. She refused him, and, in anger, the god abducted the frightened young woman from amid her maidens-in-waiting.
Model fixed fixed in blender and makeprintable for 3d printing. orig: "Borre Viking - wooden carving (from depth maps)" (https://skfb.ly/6WTqW) by Mario_Wallner is licensed under CC Attribution-NonCommercial-ShareAlike…
21mm Picatinny Laser/Flashlight mount was has a Ø19mm pipe (Ø19,2-Ø18,80) What you need: -2pcs M3x10 screw and 2Pcs M3 nut -1pcs M4x30 screw and 1pcs M4 nut Print from PETG, 4wall, 5-5top button, 20-40% infill
Wenn man keine Radzierblenden verwendet sehen die Radnaben oft ziemlich hässlich aus. Die einfachste Option sind Abdeckkappen. Diese ist billig und einfach zu drucken. Ob die auch bei anderen Herstellern eingesetzt werden kann ist…
Learn how to make your own blocky models! Video here! Remixed from this awesome model by Mustang Dave ! Prints great without support. Equipment used in video: Tri-Color Filament: https://amzn.to/3BEoNlU Anycubic Kobra Neo:…
50T GT2 Pulley, 6mm belt width, 5mm bore. Includes slot for m3 bolt and M3 screw for shaft tightening. Print on flat side, with bore perpendicular to the print bed.
!!! WARNING !!! I printed it with a 0.8mm nozzle. With spiral mode setting with sequential printing. In this way, excellent quality and strength can be achieved without a seam. I can print 9 pieces sequentially on the mat. If you do not…
You will need front PTFE holder for this to work properly. I made the inlet for the selector much larger and smooth to deal with filament that just didn't want to behave. Works great. No more selector jams. Print instructions Print layer…
Hand bender for 10mm pvc coated copper and 16mm alupex please print solid.
The 4 bore centerfire rifle cartridge was designed by British explorers in the late 1800s. Print this for props, display, education, training, just because it's cool, or scale it up to become a container. Contains 5 files: - Accurately…
If you want to use Losi Mini-T springs on your Traxxas big bore shocks, for example p/n 2660, these spring perches will allow you to make the conversion (commonly used on 1/10 scale rock crawlers). This spring perch is designed to allow…
I edited this perfect tool with fusion360 - after some testing/using the original model, I discovered that I need longer bores:) My design is not so perfect (no conical holes, clean surface), but it suits my needs. m3f files are done in…
This was an experimental fake cork-bark tube for my arboreal pet tarantulas. On the side of the base, you will find a stand/holder for a bottle cap for water. I applied a layer of "aquarium silicone" and covered it with peat moss to look…
Remix to allow for using 6mm wide belts on 3mm motor shafts.
The Quadlock adapter from “rudra”, now with four holes in the AMSP pattern. The holes have a diameter of 5mm and are slightly countersunk for countersunk screws. Now you can screw this quadlock receiver to something that has…
Y-Axis belt tensioner for Prusa MK3. This is for a 20T Gates Idler with a 5mm bore. It's loosely based on MattyVee's excellent design, https://www.thingiverse.com/thing:2786671 . Items you'll need for this: (1) Gates 20T idler with a 5mm…
Replacement case and lid for a bore snake. My Case broke, so I reused the lid and printed a new case, then the dog ate one of my case lids I left on the table, so I ended up making one of those as well. Each part will fit the standard…
(Please Note: This is still under development.) Borescope Mount and Cable Clip for MK3s. Update added 8mm and 10mm Please Note these are in Alpha so any issues please report to me. Borescope cable clip -7mm- Borescope cable clip -5.5mm-…
If you drill into your walls, or floors, you need to get the dust out for the dowel or mortar to set properly. Commercial borehole cleaners cost 40€ and more. This one costs cents to make. If you print it with PLA or PETG, be careful…
Got bored and hadn't done 3d work in a while so to alleviate boredom I decided to make simple pencil holders Enjoy Print Settings Printer: anet a8 Rafts: No Supports: No Resolution: .3 Infill: 10 Category: Office
Designed this for my friend's trombone, so it may not snap on for yours. For a large bore mouthpiece. Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 25 Category: Music
This is a remix from the following print, and you will need the other parts from it: https://www.prusaprinters.org/prints/34474-prusa-mk3-nozzlecam The original is for a 5mm endoscope/borescope usb camera, but I had a 7mm. Turn out it is…
HI, this is my first remix ever. I wanted a Gt2 pulley 2mm pitch that can be fitted on a 5mm round shaft (nema 17 stepper motor) so I remixed Džino 's design I also added 2 design one with a 4.8mm and one with 5mm The printed one its the…
Remixed version with M8 Holes Counterbored
I printed it in Sunlu PLA+ using the 0.2mm Strong OrcaSlicer profile (6 walls, 10-15% Cross Hatch infill) on my Bambu Labs X1Carbon. A brim is wise on the axle, or it may lift at the threaded end. No supports are needed for anything…
This is an accurate 3D model (exported as STEP) of a 1.5GT timing pulley with the following specifications: Pitch: 1.5 mm (GT1.5 / GT2-1.5 series) Number of teeth: 21 & 26 Belt width: 6 mm and 9mm Bore: 5 mm (with flat on shaft, exactly…
UPDATE 10/13/2019 - Added revised selector with pinhole to push out magnet for re-use in another print if needed. Also widened the bore entry points some more. I wanted all the features of the large bore remix (and all the features it was…
A great wall art of Boredom (Ennui), from Inside Out (Vice-Versa). Do not forget to LIKE the model and upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
The primary function of this jig is to help align and create counterbore holes in OpenBuilds V-Slot rails to create blind joints. The counterbore holes are created using a two-stage drill bit, which creates a 5mm hole and a 9.0mm counter…
print the sheet (https://docs.google.com/presentation/d/e/2PACX-1vSmIKiI0oQ2sJ1zYS5_3pDQ9QxFu2P_s9G4TfhR4N2rI451KlDbfOgajie_slh9RJc_RI1WJmxwR6zO/pub?start=false&loop=false&delayms=3000) in A5 and stick on like in portal-oo badge
I have a few small-bore mouthpieces, but my euphonium is a large-bore instrument, so I decide to print an adapter so I could use my other mouthpieces on my new instrument. Let me know if it comes in handy! BEWARE: If it is printed as…
GT2 60teeth bore 5mm, belt width 10mm timing belt pulley Use M3 screw and nut for fitting.
Cylindrical Handle fixed - smooth bore Impugnatura fissa cilindrica M6 / M8 / M10 Metric thread Mod: CH80_M6 - Type Fixed non-turning handle Mod: CH80_M8 - Type Fixed non-turning handle Mod: CH80_M10 - Type Fixed non-turning handle Mod:…
Bore snakes come in the most common calibers and are a great tool for quickly cleaning the bore of your firearm. However, they can get tangled up pretty easy and the brush section can even damage the rope. So i came up with this simple…
RIght now this is just a push fit. You could easily add a hole then drill / tap it to be able to use a grub screw or whatever you like. Play on TinkerCad: https://www.tinkercad.com/things/fhYw1nbNWQ4 I created this for use with the Rotary…
Adjustable bore guide for .22 centrefire up to 30 CAL. Print the part: BoreGuide_main And depending on your calibre: BoreGuide_end_22CF-25CAL BoreGuide_tip_22CF-25CAL or BoreGuide_end_26-30CAL BoreGuide_tip_26-30CAL For the shaft use a…
Scientifically accurate model of a Borealpelta, a species of ankylosaurid. The model features detailed scale texturing along the model. I created two variants of the model, standing and posed. I recommend printing it at a finer layer…
20DP Gears in all standard sizes with enough additional tolerance to be printable on most common 3D-Printers. Although these gears are only recommended for prototyping, they can be used for in-season robot build in areas of light/medium…
Lost my quiver guard for my big bore .625 blowgun, so I made a replacement that entirely covers the "razor blade" type dart. Printed in Petg, mine was quite snug. If fitment isn't sufficient, I recommend adjusting the size when slicing…
Description This is a Y-axis belt tensioner designed for standard gt2 20T or toothless idlers with 5mm bores. The 3mm bore idlers that Prusa uses are difficult to find, so I created a remix of this model which supports 5mm bore idlers.…
This remix features a deep counterbore hole for the holders. Same as the original, this is fast to print and easy to install. You'll need four M6 screws and eight zip ties. Works for Thrustmaster T300RS and Logitech G29 on the Playseat…
Designed GT2 timing pulley for my EXOS II EQ5 OnStep mount with following specifications -- Number of teeth - 60 Pitch - 2mm Bore - 6mm Belt width - 6mm The pulley has two slots designed to fit M3 hexagonal nuts to assist in shaft…
I wanted to use my 9mm laser bore sight on my 12 gauge to help set up a sight. So I built an adapter to drop it in so I didn't have to buy another laser sight. I included the Solidworks file, which can be adapted to yours. There's 3…
This is the same free insert provided by the publishers but thinned out so that it'll take much less filament and time.
This is empty chamber indicator for CZ457 action and a cold bore cap for the barrel. Parts: (2) 6 x 3 mm round magnets for ECI (3) 6 x 2 mm round magnets for CAP (1) CAP (1) ECI
Around 150 grams for the frame itself Replaceable parts 0.28 25% PLA You'll need 8x M5 Brass heat inserts and 8x M5 Bolts 10-15mm Flight Controller YSIDO F405 V3 Flight Control Motor Any VTX Any Radio Receiver Any GPS Walksnail WS-M181…
Ultra lightweight and some of the smallest mechanums available. Print in PETG.Ream all the roller shaft holes with an 1/8inch drill bit and hand drill. Ream the two screw holes with a 3mm bit. Ream all the roller holes with a 3.5mm bit.…
Bore guide to assist cleaning for a Howa 1500 chambered in .308 Winchester. I tried an existing model to suit .308s but primarily designed for the Remington 700, and found the diameter to be a few tenths of a millimetre too large for the…
Marlin 336 30-30 Bore Guide – A practical solution for hassle-free cleaning. Designed to fit snugly into your Marlin 336 30-30, this bore guide simplifies the cleaning process, making it quick and efficient. No more fumbling with…
The Boreas has been designed to fit the Tevo Tornado and CR10 -X axis gantry plate. There has also been an update to allow the usage of this duct/mount with a linear rail setup. This hotend has been designed to work with a direct drive…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I recently had a need to look under the floorboards to check on some pipework and the only easy access was a knothole less than 20mm in diameter. A cheap borescope (£7.00 on eBay) gave a good picture but was difficult to manouvre to see…
when you print this piece can you use the laser in 68 cal paintball barrels so lets say for CQB paintball use? or correct the left and right adjustment. and of course save on first strikes when adjusting a new optic. link to the movie…
Am besten aus flexiblem Material drucken um den Lauf zu schonen. Print with flexible Filament to avoid scratches.
Printed with PETG as its non toxic. Adding also a bowl with a split which can hold two different meals.
Sometimes I can't figure out what to do, and I get creative.. this is a form of 3d doodling, no plan, no set idea, just playing with a modeler... Hopefully someone gets something out of it. Enjoy! Print Settings Printer: Anet A8 Rafts: No…
It's not perfect - everything fits a little loose, but it works to keep all the parts in one place. I'll add the step file in anyone wants it. Printed Hatchbox wood PLA at 15% grid infill, 2 walls, with top layer ironing.
I remixed the fantastic design of Archetrico to use counterbore holes, because I had matching bolts lying around. Instead of M4*20mm you need M4*16mm bolts.
TinkerCad Link: https://www.tinkercad.com/things/9NUnae6U8LJ I created this for use with the Rotary 4th axis for CNC. There are holes that can be tapped for M3 to tighten the timing gear down onto the 10mm shaft / bolt. I drilled a…
Foot for bike kickstand. Bore diameter 9,5mm (works with 9,5 diameter of kickstand rod), bore length: 35mm. Additional locking mechanism. Best printed from TPU. I've printed it from 35 in Shore scale in it is good. 50% of infill, 3…
Laser Bore Sight Kit .22 calibre Note: make sure you print with 4 walls, also I used a cheap dollar store laser, it wasnt great. Try to buy a high quality laser. Made with Shapr3d https://www.shapr3d.com/ Please leave a like and rating,…
Update: Upgraded to version 2. Chamfer and decrease the overhangs: the new version cleanly prints without support. Designed GT2 timing pulley for my EXOS II EQ5 OnStep mount with following specifications -- Number of teeth - 48 Pitch -…
Starting from the point of view of an observer, the constellations can be organized in many ways, to publish them in parts (there are 88 in total), this humble amateur astronomer organized them by latitudes in the celestial sphere, for…
What better way to finish a Mario Party, Mario Jamboree or Mario Kart than to have you own winners trophy. We use ours all the time with friends and family, none of that everyone's a winner here!! Boast and take home the trophy we all…
22lr pistol bore rod I made due to having a 3D printed snap cap break in half in the barrel. May need to sand the portion that is on the build plate. Print with 3 walls for more strength and at least 30% infill to ensure it doesn't snap…
Wenn Sie Löcher in Wände gebohrt haben und diese nicht mehr benutzt werden, können Sie diese Kappen verwenden. If you have drilled holes in walls and they are no longer used, you can use these caps.
Adapter converts modern 2 1/8" door hole into 1" hole to fit antique door knob while still accommodating modern latch mechanism.
The Bore of the Gears are 8.1 mm to fit on an 8mm shaft and the key nut fits for an 4x3mm key. In the files you can see the messurements like the number of teeth. I made the Gears with a Tool so the form of the teeth are standardized.
Bore guide. Left a gap at breach to give another way of inserting cleaning patches. Held in by trigger so it doesn't fall out pulling the rod.
This is a bore brush holder that can hold two brushes for each of the following sizes: 17 caliber 20 caliber 22 caliber .243/6mm .264/6.5mm .284/7mm 30 caliber 0.338 .458 8mm 50 caliber
I always hated the mess with my different brass brushes in different calibers. Now every caliber gets it's own box. Check the different calibers. If you're missing one, just text me. I will load it up. The maximm overall length of the…
This is an improved version of my earlier design - https://www.printables.com/model/1266743-outdoor-table-umbrella-bush-assembly The earlier design has a parallel bore which is fine if that's what you want, however my wife found it…
Magura bore cap tool for Magura MT4 disc brake with 5mmx20mm screw
I had some GATES idlers leftover from my Bear projects. Might as well throw these on the Mini. Uses m5 hardware.
Bore cleaning guide for the Vudoo 360 3 lug action. Doubles as a chamber indicator that you can attach a flag to for use at the range. This also has a tapered from mouth so it helps to wedge a cleaning patch down to the chamber size. I…
Remarkably well-preserved nodosaurid from early Cretaceous Canada.
This part was designed to interface common FTC shafts to a 1/2" hex bore with soft intake wheels in mind, such as AndyMark compliant wheels and Vex Flex Wheels (with VersaHub). As always, 3D printed parts are relatively soft, so this…
