7mm borescope/endoscope nozzle cam mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix from the following print, and you will need the other parts from it:…
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 165
- Makes
- 0
- Views
- 1,945
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
This is a remix from the following print, and you will need the other parts from it: https://www.prusaprinters.org/prints/34474-prusa-mk3-nozzlecam
The original is for a 5mm endoscope/borescope usb camera, but I had a 7mm. Turn out it is actually 7.3mm and I had to try a few different scales to get it to fit perfectly, so I am uploading 3 sizes because your 7mm camera is probably a little off too.
nozzle_cam_7mm.stl - the file I used
nozzle_cam_7mm_small.stl -a little too snug for mine
nozzle_cam7mm large.stl - just a little too lose for mine
Print instructions
I printed with a 0.6 nozzle and .35mm and it took just about 10 minutes. Filament in photo is Red Carmine Prusament PETG