7mm borescope/endoscope nozzle cam mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix from the following print, and you will need the other parts from it:…
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 1945
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a remix from the following print, and you will need the other parts from it: https://www.prusaprinters.org/prints/34474-prusa-mk3-nozzlecam
The original is for a 5mm endoscope/borescope usb camera, but I had a 7mm. Turn out it is actually 7.3mm and I had to try a few different scales to get it to fit perfectly, so I am uploading 3 sizes because your 7mm camera is probably a little off too.
nozzle_cam_7mm.stl - the file I used
nozzle_cam_7mm_small.stl -a little too snug for mine
nozzle_cam7mm large.stl - just a little too lose for mine
Print instructions
I printed with a 0.6 nozzle and .35mm and it took just about 10 minutes. Filament in photo is Red Carmine Prusament PETG