Search results: winchester

Winchester Action leaver Toy Gun Options

Here is Winchester Action leaver Toy Gun. Do check the components work for you as was a suspended project. Print instructions Category: 3D Printing

.308 Winchester

The .308 Winchester is a rimless bottlenecked rifle cartridge. It is very similar to the 7.62x51mm NATO cartridge, and the two can be used interchangeable according to the SAAMI. Category: Sport & Outdoors

Rugged Cartridge Box for 308 Winchester

This is a remix of Milos V's rugged box designed to hold 25 rounds of 308 Winchester bullets. I reload bullets, and this is a nice way of keeping my precision ammo organized and ready for transport to the range. The bullets are held…

.308 Winchester/7.62 NATO replica and snap cap

.308 Winchester, also known as 308 Win., almost identical to 7.62x51mm NATO, is a centerfire rifle cartridge. .308 Winchester was designed in the United States of America by Winchester (using Frankford Arsenal's designs) in 1952. The…

Dean Winchester's First Blade from Supernatural

This is not exactly a remix, but a pointer to another publication from which I took the STL files for this print. https://www.myminifactory.com/de/object/dean-winchester-s-first-blade-from-supernatural-26080 Done by…

.308 Winchester Stacking Loading Block

.308 Winchester/7.62 mm X 51 mm labelled loading block is sized for rifle cases with a rim diameter of .473" (12 mm.) This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

308 Winchester dummy round

Based on the 308 round model by is-serp, this round has a slightly muted tip to help prevent printing issues with a standard 0.4mm nozzle. Use dummy rounds when practicing loading your rifle or magazine. I print this with 3 walls with 40%…

.308 Winchester (7.62NATO) 10 Round Ammo Box

I used the Vilcoyote77 7.62x39 50rds box as the basis of this box, but there's really no specific part of that design left. I had orgininally made these up for test batches, but they are small enought to slip into some pockets, so these…

Winchester SXP Defender Picatinny Rail/12ga Shell Side Saddle

I couldn't find any stl's for side saddles to fit my Winchester SXP Defender 12ga Shotgun, so I made one of my own by remixing a couple parts into one solid piece. Instead of sourcing the very obscure #6-48 screws that the SXP series…

.30-30 Winchester replica and snap cap

.30-30 Winchester, also known as .30 Winchester Center Fire, .30 WCF, or just .30-30, is a centerfire rifle cartridge designed in the United States of America by Winchester in 1895. Print this for props, display, education, training, just…

30-30 Winchester Bullet Quiver

Bullet quiver that holds two extra 30-30 Winchester cartridges to the side of your rifle. These will fit standard m-lok slots using t-nuts similar to what can be purchased here:…

308 Winchester (7.62x51 NATO) Cartridge Insert for Milwaukee Packout (48-22-8435)

This is a 2 part 308 Cartridge Insert for Milwaukee Packout ( 48-22-8435 ) case. Typically, when participating in a Precision Rifle Match (PRS) or attending a distance rifle course, you need to bring a fair amount of ammunition. This…

Dean Winchester - Supernatural (by Eoten93)

This is a ~13cm high model of Dean Winchester from Supernatural, originally created by Eoten93. It has been optimized for fdm printing by scaling it up and slicing dean in half. Additionally i have separated and modeled a new base that…

308 Winchester Ammo Box

Built for stability and to make the transport of ammo less obvious, because I'm sick to death of standard factory 10x2 trays tipping over on the range table and being “in your face” during transport. Each segment has a recess in the…

7.62mm X 67mm (.300 Winchester Magnum) Bullet

FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…

308 Winchester Safety Flag

Based on the 308 round model by is-serp, this round has a slightly muted tip to help prevent printing issues with a standard 0.4mm nozzle. Safety flag added using Blender. When using a firing range, the range-master may call for all…

308 Winchester Casing and Bullet

A dimensionally correct .308 casing. The bullet opening (top of casing) has a wider opening to accommodate 3D print expansion and bullet size. However, exterior dimensions of both the casing and bullet are per the 308 Winchester Spec…

300 Winchester Magnum

This is a scare and dimensionally correct print of a 300 winchester mag cartridge. Category: 3D Printing

CCI & Winchester Sized Primer Dispensers

This is a remix of Bruce's Winchester sized primer dispenser along with the original CCI sized dispenser at https://www.thingiverse.com/thing:2939986 I added pegboard pegs on the back of each so I can hang them to make room on my…

Reloading Tray .308 Winchester / Ladebrett Wiederladen

Reloading tray for .308 Winchester. Fits also for smaller caliber.

.300 Winchester Magnum Reloading Tray

Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing

Dummy Cal. .308 Winchester bullet

Simple print for sports shooters and hunters.

12 gauge Winchester Shotgun Flashlight Mount

I remixed this part to fit my Winchester SXP Defender Shotgun magazine tube. Might fit others as well. Still uses the same M3 hardware as the original design. Here is a link to the hardware and flashlight I used: Metric Screws:…

308 Winchester calibre chamber firing range safety flag

A chamber safety flag for use on firing ranges, size suits a rifle chambered in 308 Winchester. This device allows a range supervisor to see at a glance that a rifle has been made safe.

300 Winchester Magnum Stacking Loading Block

300 Winchester Magnum stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

Winchester Primer Dispenser Plus 10 percent

I took BigMrTong's excellent CCI primer dispenser and increased the size by 10% so Winchester primers will fit in. https://www.thingiverse.com/thing:2939986 I also tested it with Tula and Wolf primers. Caution - If you are using CCI…

.308 Winchester Cartridge

The .308 Winchester is a smokeless powder rimless bottlenecked rifle cartridge widely used for hunting, target shooting, police, military, and personal protection applications globally. It is similar but not identical to the 7.62×51mm…

.243 Winchester ammunition holder

The top sliding part is held in place by 7x2 piece of 2x2mm magnet. Feel free to change the magnet size,count or the front design with the .f3d files!

Picatinny rail Model 94 Winchester 30-30

Picatinny rail Model 94 Winchester 30-30. Mounts underneath to enable mounting of accessories like tactical light or bipod. NOTE: Stand on end, with support when printing.

Chibi Style Dean Winchester - Supernatural

Chibi Style Dean Winchester - Supernatural

Chaveiro .308 Winchester

Existem 2 arquivos, um para sua impressão de FDM (filamento), e um para a impressão em resina.

.308 Winchester Insert for Region 420 Funnel System

I made an insert for my .308 Winchester. I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.

Winchester 30.06 Case

Ammo case for 10x30.06 Printed with Verbatim RED PETG and Prusament Jet Black PETG 0,30mm 4 Layers. Text depth is -0,55mm so you can change color at 0,50mm I use 2mm Stainless Steel Tig welding pin for the hinge. Hope you like it

.308 Winchester Vase Mode Stacking Loading Block

308 Winchester/7.62 mm X 51 mm labelled loading block is sized for rifle cases with a rim diameter of .473" (12 mm.) This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No…

Supernatural - Dean and Sam Winchester

my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.28 Infill: 10% Material: PLA Filament Change: 3mm Black 2mm Red rest in White

Dean Winchester Lithophane

I noticed there wasn't much from Supernatural, so I made this lithophane of Dean Winchester's “Blue Steel”.

Chibi Style Sam Winchester - Supernatural

Chibi Style Sam Winchester - Supernatural

Wick Winchester 1894 Dart Blaster Shell

While you can cheaply order more shells from Ali Express these can just be self printed. They miss the rubber at the bottom and are a little shorter but i didnt see any worse performance. Them being slightly shorter than the original…

7.62×51mm NATO/.308 Winchester Prop

7.62×51mm NATO is nearly identical to .308 Winchester, and is the same caliber used by the Halo MA5B assault rifle. -Use for cosplay, short films, display piece, etc. -Should not be used with real firearms -Please use responsibly Print…

.270 Winchester ammunition holder

The top sliding part is held in place by 7x2 piece of 2x2mm magnet. Feel free to change the magnet size,count or the front design with the .f3d files!

Ammo Storage Case - for a 308 winchester 100 rounds

Simple design intended for rounds to sit primer end down. The hinge is made to fit a metal rod, with a 2 mm screw used to cap the end. It’s designed around a 0.4 mm nozzle, three walls, and approximately 15% infill. Test prints were made…

Supernatural's Sam and Dean Winchester

Design Concept This model captures the iconic brothers Sam and Dean Winchester from the popular TV show, "Supernatural," driving in their classic car. It's a great design that mixes the show's elements with a retro graphic style. Purpose…

Bullet .308 Winchester

Used as a template for leatherworking. Printed upright with PLA, 0.2 layer height which seemed to work nicely.

.243 Winchester Stacking Loading Block

.243 Winchester stacking loading block with a clearance of 20mm for powder funnel. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

.30-30 Winchester Stacking Loading Block

.30-30 Winchester stacking loading block. This is a work in progress, so check for updates before printing. Revision History: 05/13/2023 - Text vertical adjusted. Category: Tool Holders & Boxes

M.A.S.H. - Major Charles Emerson Winchester III - 1972-1983

M.A.S.H. - Major Charles Emerson Winchester III - 1972-1983

Shotgun wall mount Winchester Defender/Remington 870 - Parasolid included

Someone in the pew pew group was looking for a wall mount for their Remington 870. My Defender 870 shares the same geometry, so I used my Miraco to make a custom fitted secure mount.

Simple 10 round ammo box with sliding lid and snap lock for caliber .308 Winchester / 7,62 x 51 mm NATO

Simple 10 round ammo box with sliding lid and snap lock for caliber caliber .308 Winchester / 7,62 x 51 mm NATO. Prints without supports. I took the CIP measurements and added some space all around - seems to work well with S&B FMJ ammo.

.270 Winchester Stacking Loading Block

.270 Winchester labelled loading block is sized for rifle cases with a rim diameter of .473" (12 mm.) This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

338 Winchester Magnum holder

Holder for 338 Winchester Magnum cartridges

.270 Winchester Vase Mode Stacking Loading Block

.270 Winchester labelled loading block is sized for rifle cases with a rim diameter of .473" (12 mm.) This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2…

Winchester 1930's 12G container

12 Gauge shotshell container designed with a headstamp to look like a 1930's era shotshell. The true shell would have a brass shell, but this one has been designed to work with the same hull/container as my “sci-fi shotshell container”.…

.270 Winchester Reloading Block

Print in whatever material you like. It should be an easy print, though will require some short bridging. Most printers should easily handle this. Thanks.

winchester shell holder 12 gauge

No support 9 Shells

Winchester Daisy 1000 stock

each of the prints fits on a Ender 3 V2 and any with a build volume greater or equal to 220mm x 220mm x 250mm if you reorient the prints correctly. I haven't made dovetails or any other kind of fastening, so far its just a glue and sand.…

Sam Winchester Lithophane

I noticed there wasn't much from Supernatural, so I made this lithophane of Sam Winchester.

Winchester 94 Handle buffer tube adapter

Step file is included if you want to remix or customize your own stock. Some sanding/filing may be required to fit. if there's any gaps try using a bit of electrical tape as a shim to get a good fit. Included is the reference photo I used

Water Tight 3D scan of Winchester defender 1300

A scan I took of a Winchester Defender 1300. Should work for Remington 870 design as well. Pre-oriented for parametric designs.

.308 Winchester loading block

.308 Winchester loading block for 100 cartridges

Winchester and Winchseter Super-X Customized Lids for my 22LR Bullet Holder

These are custom “Winchester” and “Winchester Super X” I designed lids for my 22LR Bullet Holder . I have also designed a bunch of CCI lids as well as a Remington lid. For the “Winchester” lid, you can print the base layer in black or…

Lever-Action Rifle Replica of Winchester M1873 for LEGO Minifigures

This a part for LEGO Minifigures that replicates the Winchester M1873 lever-action rifle

.308 Winchester snap cap with TPU buffer insert

I only have 2 actual aluminum snap caps for my .308 repeater, so I figured I'd simply print some more. Took the measurements straight from CIP. The body has a Ø4mm hole with a rounded end, so you won't need any supports. The insert should…

.308 Winchester NATO 7.62x51mm breach safe flag

Breach safe flag for NATO 7.62x5.56mm .308 Winchester rifles, tested on Ishapore Lee Enfield rifle. Print Tips: Tested in 0.3mm Layer height 4 perimeters (0.6mm nozzle) 30% infill (impact weakness is along layer lines)

.243 Winchester Vase Mode Stacking Loading Block

.243 Winchester Vase Mode stacking loading block with a clearance of 20mm for powder funnel. This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print…

.300 Winchester Magnum Insert for Region 420 Funnel System

I made an insert for my .300 Winchester Magnum . I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.

300 Winchester Magnum Vase Mode Stacking Loading Block

300 Winchester Magnum Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your…

Winchester Featherweight

pew pew rifle

.30-30 Winchester Vase Mode Stacking Loading Block

.30-30 Winchester Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Revision History: 05/14/2023 - Fixed *-50 slot cut into lip. 05/13/2023 - Text vertical adjusted. Print Settings Rafts:…

.284 Winchester Reloading Block

This is a reloading block for .284 Winchester cases. Your printer will need to be capable of bridging, as there are several in this design.

Winchester wildcat receiver opener

Pusher to open Winchester wildcat receiver and fits in the Buttstock and held with mounting tape Printed in Pla designed to be a pressure fit so you may need to file slightly to ensure proper fit

.308 Winchester 100 round reloading block

Print in whatever material you like. There will be bridging moves, so set up your slicer and supports as per your machines capabilities. You should know them better than I would.

Softair Colt SAA 45 - Winchester Bulletts Canister

As for the title this is a SAA45 27 bullets capable container. Attention: use abundant WD40 on threads before the 1st coupling to ease it, then no more lubrication is required

Winchester 1897 buttplate

Just a rough couple of 3d models.

ESMAG - Magazines Holder - Winchester Wildcat

Introduction I like to keep everything in my gun safe tidy and make use of the otherwise unused wall space. Since the safe is lined with fabric, I designed a series of magnetic holders for magazines, firearms and accessories. Strong…

Winchester 12gauge AA Target Container

12 Gauge shotshell container designed with a headstamp to look like a AA Target shell. This one has been designed to work with the same hull/container as my “sci-fi shotshell container”, but also features the updated crimp design on the…

.30-30 Winchester/7.8x51mmR Cartridge

TOZ 78 Modern Precision Chassis | AR-Style Stock & M-LOK Handguard Winchester Wildcat

Overview The TOZ 78 (or Winchester Wildcat) is a legendary rimfire rifle known for its accuracy, but its factory wooden stock often lacks the modularity required for modern precision shooting. This 3D-printable chassis transforms your TOZ…

32 W.S. ( Winchester Special )

Accurately Dimensioned .32 Winchester Special. Must be printed at 100% infill, otherwise the bottom will shear off when ejecting. Tested to fit and cycle in a model 1894. I couldn't find this specific model here, and that simply is less…

BX-25 Shell Winchester Logo Version (revised) Wildcat

This is a basic shell for the BX-25 magazine with a Winchester Logo. It is just a cover. This is meant for Winchester Wildcat users who use the Ruger BX-25 mag and want a different logo on the mag. (The Turkish Wildcat that takes 10-22…

Winchester bullet coaster

A great gift for any shooting enthusiast or yourself! It may be useful to add some non-slip material to the bottom. The file is easily resizable. Thanks to cegsi for the original!

.458 Winchester Magnum Vase Mode Stacking Loading Block

.458 Winchester Magnum Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your…

270 Winchester casing rack

This is a simple rack that holds 50 brass casings for cartridges designed for .270 Winchester. It should also hold similar casings for bullets around a 6.8mm diameter. The main purpose of this part, especially v3, is to hold casings for…

.225 Winchester Stacking Loading Block

.225 Winchester stacking loading block with a clearance of 20mm for powder funnel. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

Winchester 1300 Recoil Pad

This recoil pad fits the Winchester 1300 shotgun but may also fit other models. Use a soft TPU filament, 80-95a and 5 walls with 7% infill. Happy printing

Winchester 1300 Recoil Pad Soft

This fits the Winchester 1300 shotgun, will also fit other models. This version is softer than the previous one and works good with TPU 95a. You might have to enable support only for the holes ( see pictures ) but its fairly easy to…

32-20 Winchester Stacking Loading Block

32-20 Winchester stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

.243 Winchester loading block

.243 Winchester loading block for 100 cardridges

25-20 Winchester Stacking Loading Block

25-20 Winchester stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

.225 Winchester Vase Mode Stacking Loading Block

.225 Winchester Vase Mode Stacking Loading Block Vase Mode stacking loading block with a clearance of 20mm for powder funnel. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

.458 Winchester Magnum Stacking Loading Block

.458 Winchester Magnum stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

308 Winchester (C.I.P.)

Height is the only firm spec for the bullet. Shape is a best guess. Print using Line width: 0,4mm Layer height: 0,2mm Bottom Layers: 3 Walls: 3 Infill: 0%

.38-40 Winchester Stacking Loading Block

.38-40 Winchester stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

.38-55 Winchester Vase Mode Stacking Loading Block

.38-55 Winchester Vase Mode stacking loading block. This is a work in progress, so check for updates before printing.

25-20 Winchester Vase Mode Stacking Loading Block

25-20 Winchester Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

.32 Winchester Special Stacking Loading Block

.32 Winchester Special stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

.38-55 Winchester Stacking Loading Block

.38-55 Winchester stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

maketa 9mm Winchester magnum

maketa 9mm Winchester magnum

.32 Winchester Special Vase Mode Stacking Loading Block

.32 Winchester Special Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

.38-40 Winchester Vase Mode Stacking Loading Block

.38-40 Winchester Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

Winchester 1300 Magazine plug - non restricted capacity

Replaces the restricted magazine plug for the winchester 1300 shotgun Some magazine tubes only fits 3 shotgun shells because they've been restricted with a longer magazine plug required by law in some instances. This plug is mainly for…