1 / 3
Stealth Airtag Spacer for Canyon Cockpit H11, H31, H36, CP30, CP0030 CX or CP10 — zdjęcie 1
1 / 3

Stealth Airtag Spacer for Canyon Cockpit H11, H31, H36, CP30, CP0030 CX or CP10

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here my final version of integrating an Airtag device into my roadbike.

Ocena
0 / 5
Polubienia
1
Pobrania
17
Wydruki
0
Wyświetlenia
182
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Problem:

Airtag inside the Carbon frame did not work that well because of Mr. Faraday.
There are some other good places to put one such as under the saddle or integrated inside a water bottle holder.
If I were a thief though those are exactly the first places to look for one. 

Solution: 

I combined the smallest Airtag capable device I could find and integrated it inside the spacertower. Depending on your cockpit situation the spacer lie either on top the cockpit or under it. For it to work, the spacers need to be stacked all together, so all either on top or all spacers under it. 
I made it a two part design allowing it to seal watertight with an Oring. 
For my bike I used the 22mm version, for my brother I made a 27mm version. If you need it custom, you can write me and I can adjust it. Its very easy. 

Parts and Tools you will need: 

  • Iphone 

  • Inner and outer part printed out in black PETG, ASA, Nylon, etc. 

  • 32x2 or similar sized O-Ring

  • „Azok stamp“ (found on aliexpress or tvcmall) 

  • Grease

  • small philips head screwdriver 

  • 2,9mm screw for wood or sheet metal 

Assembly: 

  1. Pair Azok stamp with your phone by following the instructions

  2. Remove the pcb by removing battery first, then unscrewing the pcb

  3. Install Oring and grease it really well

  4. Also grease the inner contact points of the two parts

  5. Install the Azok PCB together with the battery 

  6. Push two parts together 

  7. If you need to disassemble it, screw in the screw and pull on it. 

Tagi