Wall Mount for AOOSTAR AG02 eGPU Dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printed wall mount designed for the AOOSTAR AG02 eGPU. Easy to print with PLA, 60% infill, no supports required.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
This wall mount was designed specifically for the AOOSTAR AG02 eGPU Dock to securely mount the device on a wall.
The bracket features a reinforced 90° corner for better stability and includes countersunk screw holes so the screws sit flush with the surface. The open design ensures good airflow, which is important for eGPU setups.
Features
Designed for AOOSTAR AG02 eGPU
Open design for airflow
Easy and fast to print
Print Settings
Material: PLA
Layer height: 0.2 mm
Infill: 60%
Supports: not required
Orientation: print as shown in preview
Installation
Attach the bracket to the wall using two screws.
Place the AOOSTAR AG02 into the mount.
Connect cables and you're ready to go.
*Update
This update introduces an angled rear edge, improving load distribution and increasing overall structural stability of the mount.