Desk Stand for hEX Series Routers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Desk Stand for MikroTik hEX Series
Use hEX Stand to save space and check the link LED easily!
*I recommend printing with PETG or PLA
Tested on the following models:
hEX (RB750Gr3)
hEX Refresh (E50UG)
hEX S (RB760iGS)
hEX S/2025 (E60iUGS)
hAP ac lite (RB952Ui-5ac2nD)
These are classified by size as follows:
Standard A / B / Bunny (Height : 145mm)
hEX
hEX S
hEX S + DAC cable
hAP ac lite
Tallboy (Height : 170mm)
hEX S + Fiber cable
*The filament weight listed in the image above was measured based on 3 walls.
Standard designs are divided into A and B based on leg design.
In general, the design of Standard A is more stable, but there is no significant functional difference.
The Bunny model has a section of the wall cut out to save filament and improve airflow.
ⓒ 2025 klayf (HONG-SIK WON)
For non-commercial and personal/in-corporate use only.
Models and prints may not be sold or used for commercial purposes.