Air Quality Monitor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Air Quality Monitor - you can check the quality of the air, specially in the place where you are printing your projects.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
ESP32 Air Quality Monitor with LED Bar (SGP40)
Overview
This project is a compact desk air quality monitor based on an ESP32 C3 Waveshare microcontroller and the SGP40 - DFRobot SEN0394 VOC sensor.
It measures indoor air quality in real time and displays the result using a LED RGB 10 x WS2813 Mini 3535 and a web dashboard hosted directly on the ESP32 C3 Waveshare.
The device creates its own Wi-Fi access point and shows the air quality on a web page accessible from any phone or computer.
The LED bar provides an instant visual indication of air quality:
🟢 Green – very good air quality
🟡 Yellow – good
🟠 Orange – elevated pollution
🔴 Red – poor air quality
The ESP32 also hosts a simple web interface where you can see the current VOC level and historical data.
This makes the device ideal for:
home air monitoring
office air quality control
ventilation testing
DIY smart home projects
Features
Real-time VOC air quality monitoring
ESP32-C3 microcontroller
SGP40 digital air quality sensor
10 LED RGB air quality indicator
Automatic sensor warm-up and stabilization
Median filtering for stable readings
Automatic baseline calibration
Built-in WiFi Access Point
Web dashboard
24-hour VOC history
Fully standalone device (no internet required)
Bill of Materials (BOM)
Component | Quantity |
|---|---|
ESP32-C3 (Waveshare ESP32-C3-Zero) | 1 |
DFRobot SGP40 VOC Sensor (SEN0394) | 1 |
LED RGB 10 x WS2813 Mini 3535 | 1 |
5V power supply (USB) | 1 |
jumper wires | several |
Optional:
3D printed enclosure
diffuser for LED bar
Wiring
SGP40 Sensor (I2C)
SGP40 | ESP32-C3 |
|---|---|
VCC | 3.3V |
GND | GND |
SDA | GPIO 8 |
SCL | GPIO 9 |
LED Stick (WS2812 / WS2813)
LED Stick | ESP32-C3 |
|---|---|
VCC | 5V |
GND | GND |
DIN | GPIO 3 |
ESP32 internal LED
The onboard RGB LED is disabled in the firmware so only the external LED bar is used.
LED Color Scale
Air Quality | VOC Index | LED Color |
|---|---|---|
Very good | 0 – 100 | Green |
Good | 101 – 200 | Yellow |
Elevated | 201 – 300 | Dark Orange |
Poor | 301 – 500 | Red |
Color tuning optimized for WS2812 LEDs.
Web Interface
The ESP32 creates a WiFi network:
SSID: ESP32-AIR
Password: 12345678Open in browser:
http://192.168.4.1The web dashboard shows:
current VOC value
air quality status
24-hour graph
minimum and maximum values
The page refreshes automatically every 30 seconds.
How it Works
ESP32 reads VOC data from the SGP40 sensor
Measurements are filtered using a median filter
Auto-calibration stabilizes the baseline
VOC value is converted to a 0–500 air quality index
LED bar changes color depending on air quality
Data is logged for the 24-hour history
ESP32 hosts a local web interface