1 / 4
Heavy Duty Wall Plugs Anchors (10mm) | M6-M8 Screws — zdjęcie 1
1 / 4

Heavy Duty Wall Plugs Anchors (10mm) | M6-M8 Screws

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Printable 10mm wall plugs/anchors for heavy-duty M6-M8 screws. Includes 5 lengths. Print vertically with a raft!

Ocena
5 / 5
Polubienia
331
Pobrania
506
Wydruki
1
Wyświetlenia
2096
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

BOM: Printed with ROSA3D High Speed PLA Gray

Mid-project and realized you're out of wall plugs? Save yourself a trip to the hardware store! These heavy-duty expansion anchors are designed to hold tight in solid walls and are perfect for common DIY and household mounting tasks.

Designed specifically for a 10mm drill bit and M6 to M8 screws (or lag bolts).

The set includes 5 lengths:

  • 50mm

  • 60mm

  • 80mm

  • 100mm

  • 120mm

CRITICAL PRINTING INSTRUCTIONS: To ensure the plug expands correctly and doesn't snap when the screw is inserted, you must print it in the correct orientation:

  • Orientation: Print VERTICALLY (standing straight up on the bed).

  • Supports: NONE required.

  • Bed Adhesion: USE A RAFT. Because these are tall and have a small footprint, a raft is absolutely necessary to prevent them from falling over during printing. (See the included slicer screenshot for an example).

Tagi