Playseat Challenge X frame bracing struts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These should increase rigidity of your playseat. You can undo these to be able to fold the playseat.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 443
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
You will need to mirror these parts to get the opposite side pair. The more perimeters you have the more rigid parts will be :)
Initially I used PLA for this but when I've upgraded printer I re-printed these in ABS.
You will need to take off the playseat legs to be able to put on the "clamps". Tested for position "3" on the playseat.
Hardware I used:
M8 (Head 38mm), 60mm (2 pcs) - https://www.aliexpress.com/item/1005004364048073.html
M8*50mm (2 pcs) (preferably with no thread on top part of the shank)
M8 nut (2 pcs)
M4*20mm inner-hex bolts or pan-head screws (4 pcs)
M4 nut (4 pcs)
M4 washer (4pcs)