Playseat Challenge X frame bracing struts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These should increase rigidity of your playseat. You can undo these to be able to fold the playseat.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 40
- Makes
- 1
- Views
- 440
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
You will need to mirror these parts to get the opposite side pair. The more perimeters you have the more rigid parts will be :)
Initially I used PLA for this but when I've upgraded printer I re-printed these in ABS.
You will need to take off the playseat legs to be able to put on the "clamps". Tested for position "3" on the playseat.
Hardware I used:
M8 (Head 38mm), 60mm (2 pcs) - https://www.aliexpress.com/item/1005004364048073.html
M8*50mm (2 pcs) (preferably with no thread on top part of the shank)
M8 nut (2 pcs)
M4*20mm inner-hex bolts or pan-head screws (4 pcs)
M4 nut (4 pcs)
M4 washer (4pcs)