Dust extraction adapter for 90L sandblasting cabnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter to connect a 45mm shopvac to the generic small desktop 90L sandblasting cabniets
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
An adapter to connect a shopvac with a 45mm OD hose to the generic 90L desktop sandblasting cabniets. I have tested on a Pollor brand cabniet but when I ordered this one there are lots of other brands selling what looks to be the same unit with different branding.
When using this you may need to reduce the power of the shopvac as when I first tried it the acrylic cover was bowing inwards.
The adapter should be fairly tollerant of material choice however the TPU seal should be printed from somthing flexible to get a better seal, the seal can probably also be ommitted if you dont have any flexible filaments.
The adapter is attached by pushing in the M5 nuts that came with the unit and screwing the internal filter into the adapter.