Corghi Artiglio 500 Tire Changer Centering Cone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your tire mounting process smooth and secure with this heavy-duty centering cone
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Keep your tire mounting process smooth and secure with this heavy-duty centering cone, specifically designed for the Corghi Artiglio 500 tire changer.
Whether you need a replacement for a worn-out cone, an extra size for specific rims, or just a reliable backup for your garage, this model provides a perfect fit. It is designed with the correct taper to properly center and lock automotive rims to the machine, preventing slipping and rim damage during tire mounting and demounting.
Important Note on Strength: This is a high-stress mechanical part that will be subjected to heavy clamping forces and garage environments. Please follow the print settings below carefully to ensure the cone does not crack under pressure.
Recommended Print Settings:
Material: PETG, ABS, ASA, PC, or Nylon are strongly recommended. Do not use standard PLA, as it is too brittle and may deform under heavy clamping force or crack in a hot workshop.
Orientation: Print with the wide, flat base directly on the build plate.
Perimeters/Walls: 6 to 10. (This is crucial! Most of the compressive strength in a 3D print comes from the outer walls, not the infill).
Infill: 50% to 80% Cubic, Gyroid, or 3D Honeycomb (to withstand the crushing force from the clamping shaft).
Layer Height: 0.20mm (provides a good balance of layer adhesion/strength and a smooth taper for the wheel hub).
Supports: None required.
If this cone saves your workday in the shop, please leave a Make with a photo of it in action on the tire changer!