Dell 2005FPW to VESA 100/75 Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter block to allow installing a VESA 100 or VESA 75 monitor onto a Dell 2005FPW stand
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
I had an old Samsung monitor without a stand and a Dell 2005FPW stand whose monitor was dead.
I tried printing https://www.printables.com/model/975959-repurpose-dell-monitor-stand-vesa-100-75-adapter and found it did not fit my stand :(
So I modeled a new adapter myself. Thanks to the original creator for the inspiration.
I suspect several other monitors from around the same time use the same stand.
Parts I used:
OPTIONAL: 2x BT3x6 (or x8) self-threading screws: https://us.store.bambulab.com/products/bt3-button-head-cap-self-tapping-screw-bhcs
On bottom to set in place - optional
4x M4x14 screws (may vary by monitor - check your own and be careful not to use too long a screw as some monitors have electronics behind the VEAA mount)
Printed in PolyLite PETG, 4 walls, 6 walls, 25% gyroid, tree supports (for some cutouts I made so it fits the Samsung monitor better).