Dell 2005FPW to VESA 100/75 Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter block to allow installing a VESA 100 or VESA 75 monitor onto a Dell 2005FPW stand
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
I had an old Samsung monitor without a stand and a Dell 2005FPW stand whose monitor was dead.
I tried printing https://www.printables.com/model/975959-repurpose-dell-monitor-stand-vesa-100-75-adapter and found it did not fit my stand :(
So I modeled a new adapter myself. Thanks to the original creator for the inspiration.
I suspect several other monitors from around the same time use the same stand.
Parts I used:
OPTIONAL: 2x BT3x6 (or x8) self-threading screws: https://us.store.bambulab.com/products/bt3-button-head-cap-self-tapping-screw-bhcs
On bottom to set in place - optional
4x M4x14 screws (may vary by monitor - check your own and be careful not to use too long a screw as some monitors have electronics behind the VEAA mount)
Printed in PolyLite PETG, 4 walls, 6 walls, 25% gyroid, tree supports (for some cutouts I made so it fits the Samsung monitor better).