Filament Inlet and Plug Remix For 2025 Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I adapted the Inlet and Plug to replace the Bowden tube connector on Mark's 2025 Dry box.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
I'm adapting my existing 2025 version boxes to use some of Mark's features from his 2026 version. I was always dropping the old cap and I like the idea of the plug being connected to the box. Just unscrew the old Bowden connector and squeeze in the the inlet and plug. The tolerances are very tight!! I wanted to keep the dry box as airtight as possible.
So Far I've changed the following parts on the 2025 version:
Mark's 2026 Re-winder
My Filament Inlet and Plug
My setup has the filament exiting out the back. I swapped the locations of the top pieces so the tag was visible while printing. That is also why I changed the desiccant bin and hydrometer holder.
This is only my second model I've posted (both remixes). I used OrcaSlicer. I am new to CAD design. Please give me your thoughts, good or bad.