Filament Inlet and Plug Remix For 2025 Version
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I adapted the Inlet and Plug to replace the Bowden tube connector on Mark's 2025 Dry box.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 30
- Makes
- 0
- Views
- 270
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v2.0
I'm adapting my existing 2025 version boxes to use some of Mark's features from his 2026 version. I was always dropping the old cap and I like the idea of the plug being connected to the box. Just unscrew the old Bowden connector and squeeze in the the inlet and plug. The tolerances are very tight!! I wanted to keep the dry box as airtight as possible.
So Far I've changed the following parts on the 2025 version:
Mark's 2026 Re-winder
My Filament Inlet and Plug
My setup has the filament exiting out the back. I swapped the locations of the top pieces so the tag was visible while printing. That is also why I changed the desiccant bin and hydrometer holder.
This is only my second model I've posted (both remixes). I used OrcaSlicer. I am new to CAD design. Please give me your thoughts, good or bad.