Muzi Base Case (Uno/Duo)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the Muzi Base Duo/Uno w/ BB15 Battery
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Threw together a quick case for the Muzi Base Duo/Uno that supports the BB15 battery. There's no provision for the 2.4 ghz LoRa antenna: don't enable it. It might blow the 2.4 ghz section of the chip. I don't know.
Uses M2 screws to hold everything together. m2x12 should be fine. I think that's what I used. I will continue to improve it. The square shape is a little difficult to hold.
I printed it out of glass fiber ASA. YMMV with regards to printing tolerances and all that. You may need to tap the threads with an m2 tap. I didn't, and it still worked good enough. Thanks!