Muzi Base Case (Uno/Duo)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the Muzi Base Duo/Uno w/ BB15 Battery
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Threw together a quick case for the Muzi Base Duo/Uno that supports the BB15 battery. There's no provision for the 2.4 ghz LoRa antenna: don't enable it. It might blow the 2.4 ghz section of the chip. I don't know.
Uses M2 screws to hold everything together. m2x12 should be fine. I think that's what I used. I will continue to improve it. The square shape is a little difficult to hold.
I printed it out of glass fiber ASA. YMMV with regards to printing tolerances and all that. You may need to tap the threads with an m2 tap. I didn't, and it still worked good enough. Thanks!