Toolbox magnetic label platform
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted my drawer labels to be facing up so I can see them without taking a couple steps back to view them.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
I wanted my drawer labels to be facing up so I can see them without taking a couple steps back to view them. Other designs that I found on Printables clipped to the handle, but that made them very specific to a model of toolbox.
I had a bunch of these not so powerful magnets that are roughly 18mm diameter and 5mm thick. The diameter varies so press fitting them into a pocket was not working for me. I designed a channel that allows you to scale the width of the label platform and then just glue in the magnets needed. I started with two magnets and then decide I needed a third one.
I used a label printer to print the labels because I will likely need to change things around and printing labels are much faster than 3D printing.
PETG with a 15% infill (0.20mm Structural preset on Prusa MK4S)
No supports required.