Toolbox magnetic label platform
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted my drawer labels to be facing up so I can see them without taking a couple steps back to view them.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
I wanted my drawer labels to be facing up so I can see them without taking a couple steps back to view them. Other designs that I found on Printables clipped to the handle, but that made them very specific to a model of toolbox.
I had a bunch of these not so powerful magnets that are roughly 18mm diameter and 5mm thick. The diameter varies so press fitting them into a pocket was not working for me. I designed a channel that allows you to scale the width of the label platform and then just glue in the magnets needed. I started with two magnets and then decide I needed a third one.
I used a label printer to print the labels because I will likely need to change things around and printing labels are much faster than 3D printing.
PETG with a 15% infill (0.20mm Structural preset on Prusa MK4S)
No supports required.