Low Profile Qidi Q2 Z Axis Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simply, I didn't like the other options. This is a low profile, interlocking Z axis cover for the Qidi Q2.
- Ocena
- 4,333 / 5
- Polubienia
- 41
- Pobrania
- 362
- Wydruki
- 5
- Wyświetlenia
- 874
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a low tolerance, tight fitting model. It is low profile (only 1mm proud), and interlocking. The shoulder/lip is minimally wide, and has a spot to catch an edge if for some reason you ever need to remove them.
I printed in PETG. Be cognizant of chamber temps, and print something that will withstand those.
***As user @JohnSC_2229381 pointed out, this model reduces the Z height of the printer by roughly 1 inch. This is due to Qidi making the component attached to the z axis rails go lower than the bottom plate of the print chamber (this wasn't the case in older models, so I didn't catch this). Thank you John!
For those that need it:
When you load into your slicer, split the model into objects. Then, you'll need 4 sets of these.