Low Profile Qidi Q2 Z Axis Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simply, I didn't like the other options. This is a low profile, interlocking Z axis cover for the Qidi Q2.
- Rating
- 4.333 / 5
- Likes
- 39
- Downloads
- 350
- Makes
- 5
- Views
- 843
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a low tolerance, tight fitting model. It is low profile (only 1mm proud), and interlocking. The shoulder/lip is minimally wide, and has a spot to catch an edge if for some reason you ever need to remove them.
I printed in PETG. Be cognizant of chamber temps, and print something that will withstand those.
***As user @JohnSC_2229381 pointed out, this model reduces the Z height of the printer by roughly 1 inch. This is due to Qidi making the component attached to the z axis rails go lower than the bottom plate of the print chamber (this wasn't the case in older models, so I didn't catch this). Thank you John!
For those that need it:
When you load into your slicer, split the model into objects. Then, you'll need 4 sets of these.