Gridfinity and Flat bottomed R8 Collet Trays 6x4 and 3x4 Angled
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
R8 collet tray. Angled 45 degrees. Tapered holes hold collets precisely. The top/bottom printed separately and press fit
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 1
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an R8 collet tray. Tapered holes hold collets precisely. The top/bottom printed separately and press fit. Models for both gridfinity and smooth bottomed bases included.
Parts have been designed with slopes and chamfered to be printable without supports. The top tray is reinforced and handles 23 R8 collets without sagging when printed in PETG with 3 loops.
The holes fit R8 collets precisely, keeping them snug in place. There is enough clearance between the collets to allow for ease of grabbing. The entire setup is angled. Currently 45 degrees, but I'm happy to upload other angles if you'd like to comment what you need.