1 / 12
Gridfinity and Flat bottomed R8 Collet Trays 6x4 and 3x4 Angled — image 1
1 / 12

Gridfinity and Flat bottomed R8 Collet Trays 6x4 and 3x4 Angled

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

R8 collet tray. Angled 45 degrees. Tapered holes hold collets precisely. The top/bottom printed separately and press fit

Rating
0 / 5
Likes
3
Downloads
9
Makes
1
Views
88
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

This is an R8 collet tray. Tapered holes hold collets precisely. The top/bottom printed separately and press fit. Models for both gridfinity and smooth bottomed bases included. 

Parts have been designed with slopes and chamfered to be printable without supports. The top tray is reinforced and handles 23 R8 collets without sagging when printed in PETG with 3 loops. 

The holes fit R8 collets precisely, keeping them snug in place. There is enough clearance between the collets to allow for ease of grabbing. The entire setup is angled. Currently 45 degrees, but I'm happy to upload other angles if you'd like to comment what you need.

Tags