STRECHR Weighted Rings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A new ring type that supports adding weight into your stack. This is an advanced set of rings. As the top, bottom, and bearings will take up almost 3 ring height and you will need to also have a top and bottom normal ring you at least need to be at 5 rings to wear this.
I have designed the rings to have an 18mm groove to hold ball bearings. I'm using 16mm bearings and can easily fit 10 into the ring. Interestingly each of my bearings weights 17g which is exactly what half a normal 39mm ring weighs. Adding 10 is equivalent of adding 5 full rings.
These rings should fit many bearing sizes (under 18mm) but reach out if you need a different size.
Want to give feedback or show off? I started a discord server for my designs. Join Here
Print settings:
40% infill -- gyroid or 3d honeycomb
4 walls
Top will need a brim to stick -- be careful after removing as the edges can be sharp