1 / 2
Yaesu FT-60 SMA to BNC adapter sheath
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small piece to better fit SMA to BNC adapter to the FT-60.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I just got this radio with this generic SMA-M to BNC-F that could potentially put stress on the radio connector.
It's a straight design to enclose the adapter and fit tightly to the FT-60. A bit too tight on the knurled part. FreeCAD file is included to adapt to your specific adapter.
Printed here with translucent PETG on Bambu A1.
(There's another version for smaller adapters:)