Remix Flat Top 4mm stems - MX Keycaps (standard, tilted, tilted-lifted) silakka54
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of a remix, to create 4mm stem depth, so they work with my keyswitches. Added a 3mf for convenience
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 351
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Update 2026-03-18
Added modified keycap anchor key
This is a slight modification of @bassamanotor remix, which is based on the original (see remix list)
This prints face down with FDM instead of resin.
Made the stems holes 4mm deep to fit my switches, and including a 3mf for convenience, which has all keys for one side. There is a second plate that has the anchor keys.
I printed with 4 walls, at 50mm/s outer and inner wall speed for consistent layer quality.
For the keycap anchor key, print at 20mm/s to maintain consistent speed and quality. I also printed with 0.12 layer height for this keycap, and used Orca's Classic wall generator. It's important to get the same line width on the outer wall, to avoid hull lines (due to the ribs on the stem) that may show up if you use Arachne.
