SlimeVR box (pls read description)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi, this is my first upload.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 731
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
Components
I use 503450 battery (1000mah 3.7v), it would be able use for about 12 to 18hrs if you use MPU6050 and Wemos D1 Mini.
It is a work-in-progress so please don't hope everything to fit perfectly.
HOW TO ASSEMBLE
First put battery in the bottom then insert a charging module in to the front hole and wemos on the side then a switch too, after that solder everything and prepare the lid. Stick a MPU onto the edge of the box with double sided tape the solder it to the wemos please use a little long wire in case it is too short so you don't have to resolder then stick the MPU onto the lid upside-down then you can close the lid with M30 screw.
After that for a more comfort feels when wearing put a pva tape onto the back of the trcker.