SlimeVR box (pls read description)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hi, this is my first upload.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 731
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v2.0
Components
I use 503450 battery (1000mah 3.7v), it would be able use for about 12 to 18hrs if you use MPU6050 and Wemos D1 Mini.
It is a work-in-progress so please don't hope everything to fit perfectly.
HOW TO ASSEMBLE
First put battery in the bottom then insert a charging module in to the front hole and wemos on the side then a switch too, after that solder everything and prepare the lid. Stick a MPU onto the edge of the box with double sided tape the solder it to the wemos please use a little long wire in case it is too short so you don't have to resolder then stick the MPU onto the lid upside-down then you can close the lid with M30 screw.
After that for a more comfort feels when wearing put a pva tape onto the back of the trcker.