Counting matching models…
Information SlimeVR is an open source Virtual Reality Body Tracker project. I designed this case to house some components following the SlimeVR schematics. This is my first time making a case to fit a bunch of components and the first…
Required Hardware for each unit: 3 M2x3x3.5mm threaded insert 3 6mm m2 countersunk bolts (ISO 14581 or at least countersunk screws) 1 900 mAh 3.7V 103030 lipo battery with PH 2.0 plug USB Cable for flashing/charging (Obviously can be…
A mounting solution for Full-Body Tracking with Nintendo Switch Joy-Con. A few key details: This print does not require supports or high precision from your printer. This print was made for use with 50mm elastic straps. The holder fits…
Print as is. Replaces the back cover of the official SlimeVR trackers. Screws are reusable
A case/shroud to snap the official SlimeVR extension tracker into. Also includes a printed case that replaces the official case if needed. Unscrew the two philips screws on the bottom of the official case, remove the pcb and insert it…
A hook that is looped onto the strap to replace the need to touch the velcro ever again. Simply loop the velcro through the loop on the print then hook the strap on and tighten as needed. From now on you simply squeeze the strap together…
Mount and hook for the wider, 2 inch straps (50 mm). Quick, support-free, under 30 gram prints. PETG recommended. FreeCAD designs included. Category: Video Games
This is a redesign from a case by the creator of the SlimeVR trackers @Eiren#0666. I had to make them a little bigger to fit my lipos. The screw holes a for M2 screws.
A friend got a set of SlimeVR Official trackers and I decided I wanted to make their experience a bit more convenient. recommended to use PETG and layer height 0.2mm or 0.16mm, no supports.
This is a customized frozen slimes v1 case for slimeVR FBT trackers, for use with WEMOS D1 mini, TP4056 and BMI160 The original is designed to fit a custom PCB for connecting everything Since I don't have access to PCB manufacturing…
Official SlimeVR port protector file for mass production 3D printing purposes. We have produced over 130.000 slimes, most of which included these protective covers! These have all been printed in house on our Prusa XL, Bambulabs X1c and…
This is to adapt the DRS cable to fit near any strap while also providing strain relief. the coiled cables i got from https://dolphsreplacementservice.crd.co/ for $24 but with how strong these cables are i will not be needing another set…
Hyperion Lite slimeVR case with alternative screw gopro mount for the chest harness (displayed in pictures), the original repo doesnt include this type of mount. (https://github.com/Shine-Bright-Meow/SlimeVR-Hyperion-BMI-BNO-PCB-Case)…
The project started off as a simple “how cheap can I make a working SlimeVR tracker" and ended up turning into me trying to cram all the components into the smallest footprint I possibly could. It may not use the latest and greatest…
This is a remix based on an existing design by 6naomie from thingiverse. electronically, it's the same. Modified to better match the slime shape.
A simple holder for the phone that can be strapped to your pants. Designed to hold phone with dimensions up to 76,5x11x163mm. Recommended print settings: Supports enabled Infill ratio 5-15% Layer height 0,3mm Assembly doesn't require glue…
Hyperion case for DIY SlimeVR! The Hyperion is one of the smallest and slimmest cases to date for your DIY SlimeVR Trackers. With its completely tool-less design and tolerances fine tuned specifically for FDM 3D Printers, the Hyperion is…
Easily hang SlimeVR trackers on the wall by their straps, saving space and providing easy access to your trackers when you're ready to play.
this is a simple stand for the calibration of the slime trackers (for my case, it was public so someone could have my same problem) Printing tips: infill gyroid 5% 2 outer walls 2 top layers 2 bottom layers
SlimeVR Butterfly travel case with print in place hinges and latch! Safely transport your butterfly trackers wherever you go, fits up to 10 trackers and a dongle! The latch is held in place with a paperclip or trimmed safety pin. Credits:…
SlimeVR extension trackers have smaller loops, which make it difficult to fit them on 30mm straps. This makes it easier. Simply put the tracker into the bracket, and feed the strap through this bracket.
Components I use 503450 battery (1000mah 3.7v), it would be able use for about 12 to 18hrs if you use MPU6050 and Wemos D1 Mini . It is a work-in-progress so please don't hope everything to fit perfectly. HOW TO ASSEMBLE First put battery…
QR code goes to https://me-qr.com/dK2z3T that redirects to https://docs.slimevr.dev/ Resin printer is recommended for the ones with QR code The diameter of the keychain is 40mm and it's 4mm thick. There's three versions of this, first one…
Zaku² Case for DIY Slime VR! All the parts were designed with FDM 3D-Printing in mind, without requiring any printing support. The case has a snap-fitting lid design that snaps into place without the need for any screws or adhesive. The…
TODO: design wall mounted bases Design some sort of “top” so that the top of the shelf doesnt look unfinished More custom shelves for your unique cases! About - This is my first time designing something useful and modular! Please give me…
The initial release of this model is the first feature comp[le version of the casing. I will hopefully update this soon with full build instructions. NOTE: the switch used in this is smaller than the ones recommended on the SlimeVR…
What was originally helping someone design a case, turned out to be a fairly unique and small case that many may like. READ COMMENTS FOR UPDATES - IM TOO LAZY TO REWRITE THIS AS OF NOW xD >>>IMPORTANT<<< FIRMWARE PRECONFIGGED Slimevr…
this is still testing The original model did not have a 5pin, so I had to separate it when I needed to upload later by modifying the build. So I added an extra 5pin hole. And in order to solve the breakage of the strap part, which is the…
After working on the Official SlimeVR case design, I realized that they were not easy to print on an FDM 3D printer. I've decided to modify the design and publish it here for people to build their own SlimeVR trackers using the DIY Kit !…
A little helpful file for making cases to hold either; Wemos LOLIN D1 mini V4 TP4056 BMI160 Holds these parts loosely. Handy for making a case for SlimeVR Open Source VR Trackers - Github - Docs - Schematics Option for my first test in…
Information SlimeVR is an open source Virtual Reality Body Tracker project. I designed this case to house some components following the SlimeVR schematics. This is my first time making a case to fit a bunch of components and the first…
Separate the pieces on the print bed! Don't print the lids already snapped on. This is my attempt at making a compact SlimeVR case. The main features are a tight layout, snap on lids/covers for easy repair and assembly easy access ports.…
All credit goes to the original modellers Smeltie and Semaze
M,in,te,d - Arcturus More in the design I have added more in the current design of the Arcturus by Lixulia.https://github.com/Lixulia/Arcturus The Arcturus case is an already solid case however I wanted to modify it to what I feel is the…
Compatible with 804040 and 503759 battery. There are 2 versions: No hole - for trackers without auxiliary sensor, Hole - for ones with auxiliary sensor. Use 4.5 mm cable and small zip-tie inside the case to secure it to the case. (Old…
simple edit/remix of the official SlimeVR extension case but with added holes for use of a zip tie to secure the cable, I've also made the strap routes thicker for obvious reasons.
BMI160 - 25mm strap AUX case for use with around 4.5mm thick cables. Use small zip-tie inside to secure the cable.
SlimeVR is a set of open hardware sensors and open source software that facilitates full-body tracking (FBT) in virtual reality. With no base station required, SlimeVR makes wireless VR FBT affordable and comfortable. removed pouch…
Custom case for my DIY SlimeVR trackers. The main tracker sits in a 3-part box with a variety of ways to put a velcro strap or other attachment through it. The electronics all come from Adafruit. * No soldering is needed on the main…
SlimeVR case with 1/4" hole for mounting straps compatible with HTC VIVE trackers. For example, EOZ VR straps . To assemble it… you'll need the 3d printed object, an official SlimeVR tracker , one ruthex 1/4" insert for each tracker, and…
I create my own PCB for SlimeVR so I also had to create my own case. I upload this in case someone needs some inspiration for his case or maybe just like to modify mine.
My case designed to work with https://github.com/frosty6742/frozen-slimes-v2 I'm using 8mmx8mm push-on-push-off switches such as https://a.co/d/6yBJxXx Print the brace and mounting jig to keep the switch aligned with the top case hole and…
