Wemos LOLIN D1 mini V4 - TP4056 - BMI160 Holder(s) - SlimeVR or other - Split and Combined
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.32 – €0.39 net (excluding VAT)
For file: CE3NEO_Part-Holder-SlimeVR-kyleireland.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.36 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 25.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A little helpful file for making cases to hold either; Weemos LOLIN D1 mini V4, TP4056 or BMI160. Handy for SlimeVR.
- Rating
- 4 / 5
- Likes
- 7
- Downloads
- 137
- Makes
- 1
- Views
- 2,004
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
A little helpful file for making cases to hold either;
- Wemos LOLIN D1 mini V4
- TP4056
- BMI160
Holds these parts loosely.
Handy for making a case for SlimeVR Open Source VR Trackers - Github - Docs - Schematics
Option for my first test in combined mode or separate/split model files.
The mousepad is a SOKU DROP X1.

The components are held a little loose and not too snug, the BMI160 was fairly stuck in place.
I'll be using these files to help me make a case.
I might add a file later for the other Wemos D1 Mini with the big chip on it as shown on the SlimeVR Schematics, I have a few of those too.
Let me see your finished project in makes!
I hope that this will be handy for people!
Print settings
Creality Ender 3 Neo at 210 (Tungsten Nozzle so you can dial back)
PEI Bed for easy popping off.
30% Triangular Infill and 0.2mm Layer Height.
Supports not needed unless you modify it to need them.