Wemos LOLIN D1 mini V4 - TP4056 - BMI160 Holder(s) - SlimeVR or other - Split and Combined
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little helpful file for making cases to hold either; Weemos LOLIN D1 mini V4, TP4056 or BMI160. Handy for SlimeVR.
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 137
- Wydruki
- 1
- Wyświetlenia
- 2004
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A little helpful file for making cases to hold either;
- Wemos LOLIN D1 mini V4
- TP4056
- BMI160
Holds these parts loosely.
Handy for making a case for SlimeVR Open Source VR Trackers - Github - Docs - Schematics
Option for my first test in combined mode or separate/split model files.
The mousepad is a SOKU DROP X1.
The components are held a little loose and not too snug, the BMI160 was fairly stuck in place.
I'll be using these files to help me make a case.
I might add a file later for the other Wemos D1 Mini with the big chip on it as shown on the SlimeVR Schematics, I have a few of those too.
Let me see your finished project in makes!
I hope that this will be handy for people!
Print settings
Creality Ender 3 Neo at 210 (Tungsten Nozzle so you can dial back)
PEI Bed for easy popping off.
30% Triangular Infill and 0.2mm Layer Height.
Supports not needed unless you modify it to need them.